Read LG WP-1051 Service Manual online
TROUBLE
CAUSE
REPAIR METHOD
Spin Drying
While spining, spin dryer
basket is unbalanced.
basket is unbalanced.
Spining operation is not
properly.
properly.
After opening spin dryer cover,
spin dryer basket continues
revolving.
spin dryer basket continues
revolving.
Installation is unbalanced.
Installed area is not level.
Installed area is not level.
Load in spin dryer basket is
unbalanced.
unbalanced.
Bellows assembly is damaged.
Center between spin shaft and
coupling is unbalanced.
coupling is unbalanced.
Brake is defective.
Spin shaft is clogged.
Drain hose is clogged.
Bearing for bellows assembly is worn.
Brake is defective.
Advise the customer to install the
washing machine in a more stable
location.
washing machine in a more stable
location.
Re-distribute the load.
Advise the customer of correct loading.
Advise the customer of correct loading.
Replace with a new one.
Balance completely.
Adjust brake properly.
Remove blockage.
Remove blockage.
Replace with a new one.
Adjust brake properly.
Others
No draining
Drain selector position is defective
or is not correct.
or is not correct.
Strap connection is defective.
Lint sticks to the filter or hoses.
Set drain selector to proper position.
Advise the customer.
Advise the customer.
Adjust properly.
Remove lint and clean.
When draining water, water
does not flow out smoothly.
does not flow out smoothly.
Noise
Drain hose is clogged.
Lint is sticking to the plunger valve,
the filter or hoses.
the filter or hoses.
Blockage between the pulsator and
the tub.
the tub.
Bearing for pulsator shaft assembly
is worn.
is worn.
Bearing of bellows assembly is
worn.
worn.
Remove blockage.
Remove lint and clean.
Remove blockage.
Replace with a new pulsator shaft
assembly.
assembly.
Replace with bellows assembly.
16
Water leakage
Hose connection is not secured.
Bearing for pulsator shaft assembly
is worn.
is worn.
Plunger valve bellows is damaged.
Plunger valve assembly is
damaged.
damaged.
Bellows assembly is damaged.
Bellows connection is not secured.
Secure firmly.
Replace with a new pulsator shaft
assembly.
assembly.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Secure firmly.
Click on the first or last page to see other WP-1051 service manuals if exist.