Read LG SW6D2 Service Manual online
-14-
1. Remove the plunger valve assembly.
2. If the vent is pulled downward, it can be removed.
To assemble the vent, reverse the disassembly
procedure.
procedure.
If the vent is not inserted correctly, water will
flow back into the spin tub, and a normal spin
flow back into the spin tub, and a normal spin
Apply adhesive or use hose clamps on all joints to
prevent water leakage.
4-9. Vent Replacement
(WP-710NP/WP-720NP)
Vent
After removing the back cover, proceed as follows;
1. Disconnect the lead wires of the drain pump
assembly.
2. Disconnect all hoses(the drain hose-D and the
outlet hose assembly) from the drain pump
4-10. Drain Pump Assembly
Replacement
(WP-710NP/WP-720NP)
Outlet hose assembly
Drain hose-D
3. Separate the base from the out case.
4. Hold the drain pump assembly and remove the
4. Hold the drain pump assembly and remove the
screw fastening the drain pump assembly from the
base.
base.
5. Remove the drain pump assembly.
To assemble the drain pump assembly, reverse the
disassembly procedure.
disassembly procedure.
Fig. 46
Fig. 47
Fig. 48
NOTE
NOTE
After removing the back cover, proceed as follows;
assembly.
will not occur.
Click on the first or last page to see other SW6D2 service manuals if exist.