Read LG SW6D2 Service Manual online
-11-
4-5.
Washing Tub Assembly
R
eplacement
After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin
dryer cover, the washing cover, the Q-spring, the
nozzle case, the door switch and the back cover,
proceed as follows:
1. Disconnect the drain hose(WP-710N/WP-720N)
or the drainhose-D (WP-710NP/WP-720NP).
2. Remove the V-belt from the pulsator pulley
(Fig.32).
4-6. Gear Case Assembly
Replacement
1. Open the washing cover and loosen the pulsator
fixing screw and pull up and remove the pulsator.
(Fig.34).
Apply adhesive on hose joint to prevent water leaks.
Fig.36
3. Remove the screws fastening the washing tub
assembly and pull it out. (Fig.33)
To assemble the washing tub assembly, reverse the
disassembly procedure.
NOTE
Fig.32
Fig.33
Fig.34
2. Remove the V-belt (Fig.35).
Fig.35
3. Lay the washing machine on its front side on a
blanket or some cardboard.
4. Unscrew and remove the screws fastening the
base
and remove the base assembly. (Fig.36)
Click on the first or last page to see other SW6D2 service manuals if exist.