42PT560R-TD (CHASSIS:PP11S) - LG TV Service Manual (repair manual). Page 7

- 7 -

3) Click the Config button and Change speed

E2PROM Device setting : over the 350Khz

4) Read and write bin file

Click  “(1)Read” tab, and then load download
file(XXXX.bin) by clicking “Read”.

5) Click “Auto(2)” tab and set as below
6) Click “Run(3)”.
7) After downloading, check “OK(4)” message. 

* Caution

- Using ‘power on’ button of the control R/C, power on TV.
- USB file (EPK) version must be bigger than downloaded

version of main B/D.

- It should be only one SW binary file in USB Stick 

(1) Using ‘Power ON’ button of the control R/C, Power on TV.
(2) Insert the USB memory stick to the SET.
(3) Display USB loding message then, push the ‘Exit’ Key of

control R/C

(4) Push  the  ‘MENU’ Key and move the cusor ‘OPTION’ of

OSD ( Fig. 1)

* Caution : Don’t push the ‘OK’ key.Just cusor is on the

‘OPTION’ menu.

(5) Push the “7” key of control R/C continuously.

Then, Display “TV Software Update” Pop-up menu. (Fig. 2)

(6) Select SW file (XXXX.bin) you want, push the “OK” Key.
(7) S/W download process is excuted automatically.

( Fig. 1)

( Fig. 2)