AR-CF1 (serv.man6). Inserter unit (option) basic operation - Sharp Copying Equipment Service Manual (repair manual)

ar-cf1 (serv.man6) service manual
Model
AR-CF1 (serv.man6)
Pages
127
Size
9.34 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Inserter unit (option) basic operation
File
ar-cf1-sm6.pdf
Date

Read Sharp AR-CF1 (serv.man6) Service Manual online

CONTENTS
Parts marked with “
” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
AR-FN11
AR-PN3
AR-CF1
AR-FN12
SERVICE MANUAL
CODE: 00ZARFN12/A1E
FINISHER
PUNCH UNIT
INSERTER
AR-FN11
AR-FN12
AR-PN3
MODEL
 AR-CF1
CHAPTER 1 GENERAL DESCRIPTION  . . . . . . . . . . . . . . . . . . . . . . . . 1-1
CHAPTER 2 FINISHER UNIT BASIC OPERATION . . . . . . . . . . . . . . . . 2-1
CHAPTER 3 SADDLE STITCH UNIT BASIC OPERATION . . . . . . . . . . 3-1
CHAPTER 4 PUNCHER UNIT (OPTION) BASIC OPERATION. . . . . . . 4-1
CHAPTER 5 INSERTER UNIT (OPTION) BASIC OPERATION  . . . . . . 5-1
CHAPTER 6 MECHANICAL CONSTRUCTION . . . . . . . . . . . . . . . . . . . 6-1
CHAPTER 7 MAINTENANCE AND INSPECTION . . . . . . . . . . . . . . . . . 7-1
CHAPTER 8 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
CHAPTER 9 UNPACKING AND INSTALLATION  . . . . . . . . . . . . . . . . . 9-1
APPENDIX  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
General Precautions for Installation/Servicing/Maintenance for the Finisher
AR-FN11/FN12, Hole punch unit AR-PN3, Inserter AR-CF1
The installation and service should be done by a qualified service technician.
1. When installing the Finisher AR-FN11/FN12, Hole punch unit AR-PN3, Inserter AR-
CF1 to the Plain Paper Copier, be sure to follow the instructions described in the “Un-
packing/Set-Up Procedure for the AR-FN11/FN12/AR-PN3/AR-CF1” booklet which
comes with each unit of the AR-FN11/FN12/AR-PN3/AR-CF1.
2. The AR-FN11/FN12, AR-PN3, AR-CF1 should be installed by an authorized/qualified
person.
3. Before starting installation, servicing or maintenance work, be sure to turn off and un-
plug the copier first.
4. When selecting the installation site, avoid placing the AR-FN11/FN12/AR-CF1 and
copier on different levels or inclined floors.
5. When servicing or maintaining the AR-FN11/FN12/AR-PN3/AR-CF1, be careful about
the rotating or operation sections such as gears, pulleys, sprockets, cams, belts, etc.
6. When parts are disassembled, reassembly is the reverse of disassembly unless other-
wise noted in this manual or other related materials. Be careful not to reassemble small
parts such as screws, washers, pins, E-rings, toothed washers to the wrong places.
7. Basically, the machine should not be operated with any parts removed or disassembled.
8. Delicate parts for preventing safety hazard problems (such as breakers, thermofuses,
fuses, door switches, sensors, etc. if any) should be handled/installed/adjusted cor-
rectly.
9. Use suitable measuring instruments and tools.
10. During servicing or maintenance work, be sure to check the serial No. plate and other
cautionary labels (if any) to see if they are clean and firmly fixed. If not, take appropriate
actions.
11. The PC board must be stored in an anti-electrostatic bag and handled carefully using
a wristband, because the ICs on it may be damaged due to static electricity. Before
using the wrist band, pull out the power cord plug of the copier and make sure that
there is no uninsulated charged objects in the vicinity.
12. For the recovery and disposal of used AR-FN11/FN12/AR-PN3/AR-CF1s, consum-
able parts, packing materials, used batteries, and RAM-ICs including lithium batteries,
it is recommended that the relevant local regulations/rules.
13. After completing installation, servicing and maintenance of the AR-FN11/FN12/AR-
PN3/AR-CF1, return the AR-FN11/FN12/AR-PN3/AR-CF1 to its original state, and
check operation.
[A]
[B]
14. When you move the finisher, do not move it in the direction of the arrow as shown in the
figure [A] below otherwise it might fall down. Also, when installing the inserter AR-CF1,
hold it as the figure [B] below shows in order for your hands not to be caught.
Copyright © 2002
SHARP Corporation
Page of 127
Display

Download Sharp AR-CF1 (serv.man6) Service Manual (Repair Manual)

Here you can read online and download Sharp AR-CF1 (serv.man6) Service Manual in PDF. AR-CF1 (serv.man6) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-CF1 (serv.man6) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.