42PT560R-TD (CHASSIS:PP11S) - LG TV Service Manual (repair manual). Page 8

- 8 -

Tool Option
Area Option
Option 1
Option 2
Option 3(Available for EU & Non EU model)

* Profile: Must be changed the option value because being

different with some setting value depend on module,
inch and market 

* Equipment : Adjustment Remote Controller

(1) Push the IN-START key in the Adjust R/C.
(2) Enter Password number. The value of Password is “0 0 0

0”.

(3) Input the Option Number that was specified in the BOM,

into the Shipping area.

(4) Select  “Tool Option” by using 

D

/

E

(CH+/-) key, and press

the number key(0~9) consecutively

ex) If the value of Tool Option1 is 4, input the data using

number key “4” (Fig. 3)

(5) if it is EU model ( such as 42/50PJ**R-ZA ), select “Area

option” by using 

D

/

E

(CH+/-) key , and press the number

key(0~9) consecutively.

ex) If the value of Area Option is 40, input the data using

number key “40” (Fig. 3)

Caution

- Don’t Push “IN-STOP” key after PCB assembly

adjustment.

* PP01A/B/C Tool option

(6) EDID D/L Method

- After software D/L or PCBA manufacturing, you can

download EDID Data.

- When you adjust Tool Option, H6 Model EDID download

process is executed automatically

* If the model don’t have HDMI 3, HDMI 3 will be disappeared

at OSD Window.

[Caution]

- When you adjust tool option, don’t connect HDMI or D-

sub cable. 

- If you connect some cable, EDID D/L process will be

failed. 

(7) Adjustment method    

Before PCBA check, have to change the Tool option and
Area option  

[ About PDP

After done all adjustments, Press IN-START button and
compare Tool option and Area option value with its BOM, if
it is correctly same then Change “RF mode” and then
unplug the AC cable.
If it is not same, then correct it same with BOM and unplug
AC cable. 
For correct it to the model’s module from factory JIG
model.

[ Don’t push The IN-STOP KEY after completing the function

inspection.

Caution 

- Never  Use the cable( HDMI or D-sub cable) for EDID

Writing. 

- Automatically PP01A/B/C Model EDID download process

is executed when you adjust Tool Option.

( Fig. 3)

Model

Tool option

Area Option

42PT250R-TA

13

1

Inch

Tool

SIDE AV

0/1

HDMI

0/1/2/3

Side HDMI

0/1

COMP2

0/1

RGB

0/1

RS232C

0/1

Local Key

0 (7KEY) / 1 (8KEY)

LED TYPE

0 (RED) / 1 (RED/White) / 2 (Reserve)

USB TYPE

0 (NONE) / 1 (PHOTO, MUSIC) 

/ 2 (PHOTO, MUSIC, DivX)