Read JBL SPOT (serv.man2) EMC - CB Certificate online
Page 20 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
6.1.2.1
Requirements
N/A
Test voltage (V) .................................................:
Current in the test circuit (mA) ..........................:
6.1.2.2
Exclusions...........................................................:
N/A
6.2
Protection of equipment users from overvoltages on telecommunication networks
N/A
6.2.1
Separation requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1
Impulse test
N/A
6.2.2.2
Steady-state test
N/A
6.2.2.3
Compliance criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. output current (A) .......................................:
Current limiting method ......................................:
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
N/A
7.1
Protection of cable distribution system service
persons, and users of other equipment
connected to the system, from hazardous
voltages in the equipment
persons, and users of other equipment
connected to the system, from hazardous
voltages in the equipment
N/A
7.2
Protection of equipment users from overvoltages
on the cable distribution system
on the cable distribution system
N/A
7.3
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.3.1
General
N/A
7.3.2
Voltage surge test
N/A
7.3.3
Impulse test
N/A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
A.1
Flammability test for fire enclosures of movable equipment having a total mass
exceeding 18 kg, and of stationary equipment (see 4.7.3.2)
exceeding 18 kg, and of stationary equipment (see 4.7.3.2)
N/A
A.1.1
Samples..............................................................:
Wall thickness (mm) ...........................................:
A.1.2
Conditioning of samples; temperature (°C) ........:
N/A
A.1.3
Mounting of samples ..........................................:
N/A
A.1.4
Test flame (see IEC 60695-11-3)
N/A
Click on the first or last page to see other SPOT (serv.man2) service manuals if exist.