Read JBL SPOT (serv.man2) EMC - CB Certificate online
Page 15 of 58
Report No.:
11008507 001
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
3.4.9
Plugs as disconnect devices
N/A
3.4.10
Interconnected equipment
N/A
3.4.11
Multiple power sources
N/A
3.5
Interconnection of equipment
P
3.5.1
General requirements
See below.
P
3.5.2
Types of interconnection circuits ......................... : Interconnection circuits of
SELV through the connectors.
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnection.
N/A
4
PHYSICAL REQUIREMENTS
P
4.1
Stability
P
Angle of 10°
This appliance does not
overbalance when tilted to an
angle of 10° from its normal
upright position.
overbalance when tilted to an
angle of 10° from its normal
upright position.
P
Test: force (N).....................................................:
Equipment is not a
floorstanding unit.
floorstanding unit.
N/A
4.2
Mechanical strength
No hazardous voltages present in the unit or other hazards foreseeable.
No hazardous voltages present in the unit or other hazards foreseeable.
N/A
4.2.1
General
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5
Impact test
N/A
Fall test
N/A
Swing test
N/A
4.2.6
Drop test
N/A
4.2.7
Stress relief test
N/A
4.2.8
Cathode ray tubes
N/A
Picture tube separately certified .......................... :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) .... :
N/A
4.3
Design and construction
P
Click on the first or last page to see other SPOT (serv.man2) service manuals if exist.