Read JBL SOUNDFLY AIR EMC - CB Certificate online
Page 10 of 38
Report No. : 12-1330-0044
IEC/EN 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Components bridging double or reinforced insulation
complying with 14.1 a) or 14.3
complying with 14.1 a) or 14.3
The isolating transformer has
been tested within this report
and complying with subclause
14.3.
been tested within this report
and complying with subclause
14.3.
P
Basic insulation bridged by components complying
with 14.3.4.3.
with 14.3.4.3.
N/A
Basic and supplementary insulation each being
bridged by a capacitor complying with 14.1 a)
bridged by a capacitor complying with 14.1 a)
N/A
Double or reinforced insulation being bridged with 2
capacitors in series complying with 14.2.1 a)
capacitors in series complying with 14.2.1 a)
N/A
Double or reinforced insulation being bridged with a
single capacitor complying with 14.2.1 b)
single capacitor complying with 14.2.1 b)
Hazardous live parts and
accessible parts separated by
one capacitor, which used was
certified as Y1 capacitor
according to IEC 60384-14.
accessible parts separated by
one capacitor, which used was
certified as Y1 capacitor
according to IEC 60384-14.
P
8.7
This clause is void
N/A
8.8
Basic or supplementary insulation > 0,4 mm (mm) :
N/A
Reinforced insulation > 0,4 mm (mm) .................... :
The photo coupler and internal
plastic enclosure which were
provided distance through
insulation of minimum 0.4 mm.
See appended table 14 for
details.
plastic enclosure which were
provided distance through
insulation of minimum 0.4 mm.
See appended table 14 for
details.
P
Thin sheet insulation (excluding non-separable thin
sheet insulation. See 8.22)
sheet insulation. See 8.22)
The thin sheet materials of
polyester tape used in
transformers.
polyester tape used in
transformers.
P
Basic or supplementary insulation, at least two
layers, each meeting 10.3
layers, each meeting 10.3
N/A
Basic or supplementary insulation, three layers any
two of which meet 10.3
two of which meet 10.3
N/A
Reinforced insulation, two layers each of which meet
10.3
10.3
(see appended table 13)
P
Reinforced insulation, three layers any two which
meet 10.3
meet 10.3
N/A
8.9
Adequate insulation between internal hazardous live
conductors and accessible parts
conductors and accessible parts
All internal wires with only
basic isolation are routed so
that they are not close to any
live bare components.
basic isolation are routed so
that they are not close to any
live bare components.
P
Adequate insulation between internal hazardous live
parts and conductors connected to accessible parts
parts and conductors connected to accessible parts
All internal hazardous live parts
are separated by double or
reinforced insulation form
conductors connected to
accessible parts.
are separated by double or
reinforced insulation form
conductors connected to
accessible parts.
P
Click on the first or last page to see other SOUNDFLY AIR service manuals if exist.