SB 200 (serv.man5) - JBL Audio EMC - CB Certificate (repair manual). Page 8

Read JBL SB 200 (serv.man5) EMC - CB Certificate online

Report No.: EM201200331-1                        Application No.:ZJ00016958                       Page 8 of 56 
 
 
4. RADIO TECHNICAL REQUIREMENTS SPECIFICATION IN EN 300 328
 
4.1 MAXIMUM TRANSMIT POWER 
4.2.1 LIMITS 
Frequency 
EN300 328 clause 4.3.1 
2400MHz~2483.5 MHz 
20 dBm (i.e. 100mW) 
4.2.2TEST PROCEDURE 
Test requirement: 
EN 300 328 clause 4.3.1 
Test Method: 
EN 300 328 clause 5.7.2.2 
EUT Operation: 
Fixed Frequency 
Status: 
Keep EUT on transmitting mode by the software provided by 
manufacturer. 
Pretest the EUT at different transmission rate and report show the worst 
case data. 
Test channel: 
Lowest channel: (2402MHz) 
Middle channel: (2441MHz), 
Highest channel: (2480MHz) 
Test condition: 
Normal and extreme test conditions. 
Equipment Used: 
Refer to section 3.4 
Test Procedure: 
As annex C1 of standard EN 300328 
Pre-test the 3 modulation to find GFSK and 8DPSK is worse case, so only record GFSK 
and 8DPSK test data. 
 
4.1.3 TEST SETUP 
 
 
 
 
 
 
 
 
        
Antenna  
 
EUT
  
  
Receiver 
Page of 56
Display

Click on the first or last page to see other SB 200 (serv.man5) service manuals if exist.