Read JBL ON TIME 200ID (serv.man2) EMC - CB Certificate online
<12014165 001>
Page 8 of 73
IEC 60065
Clause
Requirement – Test
Result - Remark
Verdict
IEC60065E
ASTABEAB
8.2
No shock hazard when changing voltage setting
device, fuse-links or handling drawers etc.
device, fuse-links or handling drawers etc.
Tools are used.
P
8.3
Insulation of hazardous live parts not provided by
hygroscopic material
hygroscopic material
No hygroscopic material used.
P
8.4
No risk of electric shock following the removal of a
cover which can be removed by hand
cover which can be removed by hand
No such cover which can be removed by
hand.
hand.
N/A
8.5
Class I equipment
Class II appliance.
N/A
Basic insulation between hazardous live parts and
earthed accessible parts
earthed accessible parts
N/A
Capacitors bridging basic insulation complying with
14.2.1 a)
14.2.1 a)
No such capacitors provided.
N/A
8.6
Class II equipment and Class II constructions
within Class I equipment
within Class I equipment
See below.
P
Reinforced or double insulation between hazardous
live parts and accessible parts
live parts and accessible parts
Secondary circuit to primary circuit is
separated by reinforced or double
insulation. (The insulation system of
switching transformer is double insulation
system)
separated by reinforced or double
insulation. (The insulation system of
switching transformer is double insulation
system)
P
Components bridging reinforced or double
insulation complying with 14.1 a) or 14.3
insulation complying with 14.1 a) or 14.3
The switching transformer has been
tested during this approval.
tested during this approval.
P
Basic and supplementary insulation each being
bridged by a capacitor complying with 14.2.1 a)
bridged by a capacitor complying with 14.2.1 a)
X2 capacitor (CX1) between L/N of
primary and secondary circuits according
to IEC 60384-14+A1 was used.
primary and secondary circuits according
to IEC 60384-14+A1 was used.
P
Reinforced or double insulation being bridged with
2 capacitors in series complying with 14.2.1 a)
2 capacitors in series complying with 14.2.1 a)
No such components.
N/A
Reinforced or double insulation being bridged with
a single capacitor complying with 14.2.1 b)
a single capacitor complying with 14.2.1 b)
Y1 capacitor (CY1) between primary and
secondary circuits according to IEC
60384-14+A1 was used.
secondary circuits according to IEC
60384-14+A1 was used.
P
Basic insulation bridged by components complying
with 14.3.4.3
with 14.3.4.3
No such components.
N/A
8.7
Basic insulation between parts at 35 V to 71 V
(peak) a.c. or 60 V to 120 V d.c. and accessible
parts
(peak) a.c. or 60 V to 120 V d.c. and accessible
parts
No such circuit.
N/A
Reinforced or double insulation between circuits
operating at voltages between 35 V and 71 V
(peak) a.c. or between 60 V and 120 V d.c. and
hazardous live parts at higher voltage
operating at voltages between 35 V and 71 V
(peak) a.c. or between 60 V and 120 V d.c. and
hazardous live parts at higher voltage
N/A
Separation by Class II isolating transformer
N/A
Separation by Class I transformer
N/A
Click on the first or last page to see other ON TIME 200ID (serv.man2) service manuals if exist.