Read JBL ON STAGE (serv.man3) EMC - CB Certificate online
IEC 60950 3rd. Ed, 1999
- Page 1 of 1 -
Order No.
23171
APPENDIX: CHINESE DEVIATIONS
Test results according to CB BULLETIN No. 105A, May 2003
Clause
Requirement - Test
Result - Remark
Ver-
dict
1.4.5, 1.6.5
The minimum supply tolerance for China is -
10% and +10% (not -10% and +6%)
10% and +10% (not -10% and +6%)
Class III equipment.
N
1.7.1
A single rated voltage shall be expressed as 220
V.
When a rated voltage range is given, the range
shall cover 220 V.
When a variety of rated voltages or rated
voltage ranges are given, one of them shall be
220 V, and shall be set as 220 V when
dipached from the factory.
Rated frequency or rated frequency shall be 50
Hz or incluid 50 Hz.
If a unit is not provided with a means for direct
connection to the AC mains supply, it need not
be marked with any electrical rating.
V.
When a rated voltage range is given, the range
shall cover 220 V.
When a variety of rated voltages or rated
voltage ranges are given, one of them shall be
220 V, and shall be set as 220 V when
dipached from the factory.
Rated frequency or rated frequency shall be 50
Hz or incluid 50 Hz.
If a unit is not provided with a means for direct
connection to the AC mains supply, it need not
be marked with any electrical rating.
Must be considered before
marketing in China.
marketing in China.
N
1.7.12
Instructions and equipment markings related to
safety shall be in Chinese.
safety shall be in Chinese.
No precaution necessary.
—
3.2.01
A plug complying with GB1002-1996 must be
provided for units shipped to China (this plug is
not in compliance with IEC 60083).
provided for units shipped to China (this plug is
not in compliance with IEC 60083).
Class III equipment.
N
Click on the first or last page to see other ON STAGE (serv.man3) service manuals if exist.