Read JBL ON STAGE (serv.man3) EMC - CB Certificate online
- Page 16 of 19 -
Order No. 23171
4
PHYSICAL REQUIREMENTS
—
4.1
Stability
Refer below:
—
Angle of 10°
Unit does not overbalance at 10°.
P
Test: force (20% of the weight of
the unit, max. 250N)
the unit, max. 250N)
The unit is not floor-standing.
N
Test: force (800N)
The unit is not floor-standing.
P
4.2
MECHANICAL STRENGTH
Class III equipment
N
4.3
DESIGN AND CONSTRUCTION
—
4.3.1
Edges and corners
No edges or corners.
N
4.3.2
Handles and manual controls
Class III equipment, no hazardous voltages.
N
4.3.3
Adjustable controls
No hazardous adjustable controls.
N
4.3.4
Securing of parts
Class III equipment, no hazardous voltages.
N
4.3.5
Connection of plugs and sockets
SELV and TNV connectors do not comply with IEC
60320 or IEC 60083.
60320 or IEC 60083.
P
4.3.6
Direct plug -in equipment
Not intended to plug directly into a wall socket-outlet.
N
4.3.7
Heating elements in earthed
equipment
equipment
No heating elements provided.
N
4.3.8
Batteries
No batteries in equipment.
N
4.3.9
Oil and grease
Insulation is not exposed to oil, grease etc.
N
4.3.10
Dust, powders, liquids and gases
The equipment does not generate ionizing radiation or
use a laser, and does not contain flammable liquids or
gases.
use a laser, and does not contain flammable liquids or
gases.
N
4.3.11
Containers for liquids or gases
No containers for liquids or gases in the equipment.
N
4.3.12
Flammable liquids
The equipment does not contain flammable liquid.
N
4.3.13
Radiation
The equipment does not generate ionizing radiation or
use a laser, and does not contain flammable liquids or
gases. LEDs are diffused type.
use a laser, and does not contain flammable liquids or
gases. LEDs are diffused type.
N
4.4
PROTECTION AGAINST
HAZARDOUS MOVING PARTS
HAZARDOUS MOVING PARTS
No moving parts.
N
Click on the first or last page to see other ON STAGE (serv.man3) service manuals if exist.