ON STAGE 200ID - JBL Audio EMC - CB Certificate (repair manual). Page 96

IEC 60950-1 (ed.1) 

 

- Page 1 of 1 - 

 

 

Report No.   98323 

 

 

 
 

1.4.5 

1.4.5 second paragraph replaced by: 
If the equipment is intended for direct 
connection to an AC MAINS SUPPLY, the 
tolerances on RATED VOLTAGE shall be 
taken as +10 % and –10 %,unless: 

Class III equipment. 

N 

1.7.1 

1.7.1 fifth paragraph replaced by: 
When single rated voltage is given, it should 
be marked 220 V; when a rating range is 
given, the voltage range shall have a 
hyphen (-) between the minimum and 
maximum RATED VOLTAGES and should 
cover 220 V; When multiple RATED 
VOLTAGES or RATED VOLTAGE RANGES 
are given, they shall be separated by a solidus 
(/) and one of them must be 220 V and also 
factory default setting should be 220 V. 
 
RATED FREQUENCY or RATED 
FREQUENCY RANGE should be 50Hz or 
cover 50Hz, unless the equipment is designed 
for d.c.

 only;

 

Class III equipment. 

N 

1.7.12 

1.7.12 replaced by: 
Instructions and equipment marking related to 
safety shall be written in simplified Chinese in 
which the equipment is to be installed. 

Must be considered before 
marketed in China. 

— 

3.2.1 

3.2.1 Add at the end of the first paragraph: 
Plugs of apparatus which are intended for the 
connection of the mains supply should comply 
with requirements of GB1002. 

Class III equipment. 

N