Read JBL ON STAGE 200ID EMC - CB Certificate online
- Page 11 of 63 -
Report
No.
98323
IEC 60950-1:2005 / EN 60950-1:2006
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
2.1.1.6
Manual controls
No shafts of knobs etc. at ELV
or hazardous voltage.
or hazardous voltage.
N
2.1.1.7
Discharge of capacitors in equipment
Class III equipment.
N
Measured voltage (V); time-constant (s)................:
⎯
2.1.1.8
Energy hazards – d.c. mains supply
Supplied from SELV.
N
a) Capacitor connected to the d.c. mains supply ..:
N
N
2.1.1.9 Audio
amplifiers .....................................................:
See 2.1.1.1.
P
2.1.2
Protection in service access areas
Class III equipment.
N
2.1.3
Protection in restricted access locations
Equipment not intended for
installation in RAL.
installation in RAL.
N
Measuring instrument
Inv. no.
Date
2.2 SELV
circuits
⎯
2.2.1
General requirements
SELV limits are not exceeded
under normal condition and
after a single fault. Equipment
is powered from a SELV
source.
under normal condition and
after a single fault. Equipment
is powered from a SELV
source.
P
2.2.2
Voltages under normal conditions (V) ................... :
Powered by SELV source.
P
2.2.3
Voltages under fault conditions (V) ....................... :
Powered by SELV source.
P
2.2.4
Connection of SELV circuits to other circuits ...... :
SELV circuits are not
connected to other circuits
than protective earth.
connected to other circuits
than protective earth.
P
Measuring instrument
Inv. no.
Date
2.3 TNV
circuits
⎯
2.3.1 Limits
⎯
Click on the first or last page to see other ON STAGE 200ID service manuals if exist.