ON STAGE 200ID (serv.man3) - JBL Audio EMC - CB Certificate (repair manual)

Model
ON STAGE 200ID (serv.man3)
Pages
46
Size
2.47 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
on-stage-200id-sm3.pdf
Date

View JBL ON STAGE 200ID (serv.man3) EMC - CB Certificate online

This report consists of 46 numbered pages including this page and shall not be reproduced except in full, without the written 
approval of the testing laboratory. The results are related to the equipment under test only (type-test) 
Worldwide Testing and Certification
 
 
TEST REPORT 
ELECTROMAGNETIC COMPATIBILITY (EMC) 
 
 
Report Reference No
......................:  98323 
Supervised by (name & signature) ...:  Daria Liu 
 
Approved by (name & signature)......:  Hyun Ho Kim 
.
Date of issue.....................................:  2008-3-11 
 
 
Report issued by
............................:  Nemko AS Shenzhen Rep.office 
Address ............................................:  Rm3010-3011, Block A,United Plaza,No 5022 Binhe 
Road,Futian District,Shenzhen,Guangdong ,China 
Testing procedure.............................:  Supervised testing at external laboratory 
Testing location/ address .................:  See page 9 
 
 
Applicant’s name
............................:  Harman Multimedia
 
 
Test specification: 
 
Standards for Emission ....................:  EN 55022:2006 
EN 61000-3-2:2006 
EN 61000-3-3:1995+A1:2001+A2:2005 
Standards for Immunity ....................:  EN 55024:1998+A1:2001+A2:2003 
Arrival of EUT ...................................:  2008.2.25 
Test data of EUT  .............................: 
 
2008.2.25-2.27 
Test item description .....................:  Computer Speaker system 
Trade Mark .......................................:  JBL 
Manufacturer ....................................:  Harman Multimedia 
Address ...........................................:  8500 Balboa Avenue, Northridge, CA 91329, USA 
Type..................................................:  on stage 200 ID 
Serial number ...................................:  N/A 
 
 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 2 of 46 
Index of the test report:
 
1  Summary Emission............................................................................................... 5 
1.1
 
Standards ................................................................................................................................... 5
 
1.2
 
Results........................................................................................................................................ 5
 
2  Summary Immunity............................................................................................... 6 
2.1
 
Standards ................................................................................................................................... 6
 
2.2
 
Results........................................................................................................................................ 6
 
2.3
 
Performance criteria according to product or product family standards..................................... 7
 
3  General information .............................................................................................. 8 
3.1
 
Description of Equipment under test (EUT)................................................................................ 8
 
3.2
 
Measurement Uncertainly .......................................................................................................... 8
 
3.3
 
Test Mode (TM) .......................................................................................................................... 8
 
3.4
 
Climatic conditions...................................................................................................................... 9
 
3.5
 
Testing location .......................................................................................................................... 9
 
4  Measurement of conducted emission ................................................................. 10 
4.1
 
Standards ................................................................................................................................. 10
 
4.2
 
Measurement equipment.......................................................................................................... 10
 
4.3
 
Test set-up................................................................................................................................ 10
 
4.4
 
Test result................................................................................................................................. 11
 
4.5
 
Diagrams and tables................................................................................................................. 12
 
4.5.1
 
Diagram 001 .................................................................................................................... 12
 
4.5.2
 
Diagram 002 .................................................................................................................... 13 
4.5.3
 
Diagram 003 .................................................................................................................... 14 
4.5.4
 
Diagram 004 .................................................................................................................... 15 
4.5.5
 
Table 005 ......................................................................................................................... 16 
5  Measurement of radiated emission..................................................................... 17 
5.1
 
Standards ................................................................................................................................. 17
 
5.2
 
Measurement equipment.......................................................................................................... 17
 
5.3
 
Test set-up................................................................................................................................ 17
 
5.4
 
Test result................................................................................................................................. 18
 
5.5
 
Diagrams and tables................................................................................................................. 19
 
5.5.1
 
Diagram 006 .................................................................................................................... 19
 
5.5.2
 
Diagram 007 .................................................................................................................... 20 
5.5.3
 
Diagram 008 .................................................................................................................... 20 
6  Harmonic current ................................................................................................ 21 
6.1
 
Standard ................................................................................................................................... 21
 
6.2
 
Measurement equipment.......................................................................................................... 21
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 3 of 46 
6.3
 
Test set-up................................................................................................................................ 21
 
6.4
 
Classification of EUT ................................................................................................................ 21
 
6.5
 
Harmonic current measurements ............................................................................................. 21
 
6.6
 
Test results ............................................................................................................................... 22
 
6.7
 
Table......................................................................................................................................... 22
 
6.7.1
 
Table 009 ......................................................................................................................... 22 
6.7.2
 
Table 010 ......................................................................................................................... 26 
 
7  Voltage fluctuations and flicker ........................................................................... 29 
7.1
 
Standard ................................................................................................................................... 29
 
7.2
 
Measurement equipment.......................................................................................................... 29
 
7.3
 
Test set-up................................................................................................................................ 29
 
7.4
 
Test results ............................................................................................................................... 29
 
7.5
 
Table......................................................................................................................................... 29
 
7.5.1
 
Table 011 ......................................................................................................................... 29
 
8  Electrostatic discharge, ESD .............................................................................. 30 
8.1
 
Standard ................................................................................................................................... 30
 
8.2
 
Measurement equipment.......................................................................................................... 30
 
8.3
 
Test set-up................................................................................................................................ 30
 
8.4
 
Test results ............................................................................................................................... 31
 
8.5
 
Tables....................................................................................................................................... 31
 
8.5.1
 
Table 012 ......................................................................................................................... 31
 
9  Radiated immunity.............................................................................................. 32 
9.1
 
Standard ................................................................................................................................... 32
 
9.2
 
Measurement equipment.......................................................................................................... 32
 
9.3
 
Test set-up................................................................................................................................ 32
 
9.4
 
Test results ............................................................................................................................... 33
 
9.5
 
Table......................................................................................................................................... 33
 
9.5.1
 
Table 013 ......................................................................................................................... 33
 
10  Electrical Fast Transients/Bursts Immunity......................................................... 34 
10.1
 
Standard............................................................................................................................... 34
 
10.2
 
Measurement equipment ..................................................................................................... 34
 
10.3
 
Test set-up ........................................................................................................................... 34
 
10.4
 
Test results........................................................................................................................... 34
 
10.5
 
Table .................................................................................................................................... 34
 
10.5.1
 
Table 014 ......................................................................................................................... 34
 
11  Surge Immunity .................................................................................................. 35 
11.1
 
Standard............................................................................................................................... 35
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 4 of 46 
11.2
 
Measurement equipment ..................................................................................................... 35
 
11.3
 
Test set-up ........................................................................................................................... 35
 
11.4
 
Test results........................................................................................................................... 35
 
11.5
 
Table .................................................................................................................................... 35
 
11.5.1
 
Table 015 ......................................................................................................................... 35
 
12  Conducted Immunity........................................................................................... 36 
12.1
 
Standard............................................................................................................................... 36
 
12.2
 
Measurement equipment ..................................................................................................... 36
 
12.3
 
Test set-up ........................................................................................................................... 36
 
12.4
 
Test results........................................................................................................................... 36
 
12.5
 
Table .................................................................................................................................... 36
 
12.5.1
 
Table 016 ......................................................................................................................... 36
 
13  Voltage dips and interruptions Immunity............................................................. 37 
13.1
 
Standard............................................................................................................................... 37
 
13.2
 
Measurement equipment ..................................................................................................... 37
 
13.3
 
Test set-up ........................................................................................................................... 37
 
13.4
 
Test results........................................................................................................................... 37
 
13.5
 
Table .................................................................................................................................... 37
 
13.5.1
 
Table 017 ......................................................................................................................... 37
 
Annex A .................................................................................................................... 38 
EUT / technical data........................................................................................................................... 38
 
Annex B .................................................................................................................... 42 
EUT set-up -details- ........................................................................................................................... 42
 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 5 of 46 
1 Summary 
Emission 
1.1 Standards 
Generic standard 
-- 
Product or product family standard 
EN 55022:2006 
Product category 
-- 
1.2 Results 
Environmental 
phenomena 
Port / Test module 
 
Basic standard and test 
setup 
Limit class 
Result 
Conducted emission 
Input AC power ports    
CISPR 16 / CISPR 22 
 Table 1 – 
Class B  
Pass 
Radiated emission 
Enclosure 
  
CISPR 16 / CISPR 22 
 Table 5 (3m) – 
Class B 
Pass 
Harmonic current 
emission 
AC input power ports   
EN 61000-3-2:2006 
Class A 
Pass* 
 
Voltage fluctuations 
and flicker 
AC input power ports   
 
EN 61000-3-
3:1995+A1:2001+A2:2005 
See section 7 
Pass ** 
For details see test modules 
 
 
*) 
For devices with a rated power of 50 W or less, not being lighting equipment, no limit values are effective.
(EN61000-3-2) 
For professionally used devices with a total rated power exceeding 1 kW no limit values are effective. 
(EN61000-3-2) 
 
**) 
There is no testing required if the device does not generate any significant voltage fluctuations or flicker. 
(EN61000-3-3) 
A short time measurement confirmed the assumption that this is the fact. The details in the test module 
are representing the results of the short time measurement. 
 
 
 
 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 6 of 46 
2 Summary 
Immunity 
2.1 Standards 
Generic standard 
-- 
Product or product family standard 
EN55024:1998+A1:2001+A2:2003 
Product category: 
--  
Performance criteria: 
see table below 
2.2 Results 
Environmental 
phenomena 
Port / Test module 
Basic standard and test setup 
Performance criteria 
Result 
Electrostatic 
discharge, ESD 
Enclosure 
EN 61000-4-2:1995/A1:
1998/A2:2001 
B Pass 
Radiated immunity 
Enclosure 
80 - 1000 MHz 
EN 61000-4-3:2006 
A Pass 
Electrical Fast 
Transients/Bursts 
Immunity 
Input AC power ports  EN 61000-4-4:2004 
B Pass 
Surge Immunity 
Input AC power ports  EN 61000-4-5:2006 
B Pass 
Conducted Immunity 
Input AC power ports   EN 61000-4-6:1996/A1:2001 
A Pass 
Voltage dips and 
interruptions 
Immunity 
Input AC power ports  EN 61000-4-11:2004 
B for 0% 0.5 
C for 0% 250 
C for 70% 25 
Pass 
Remark:EUT not contain components susceptible to magnetic fields,so N/A for Power-frequency 
magnetic field test . 
For details see test modules 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 7 of 46 
2.3  Performance criteria according to product or product family standards 
 
Performance criterion A 
The equipment shall continue to operate as intended without operator intervention. No degradation 
of performance or loss of function is allowed below a performance level specified by the 
manufacturer when the equipment is used as intended. The performance level may be replaced by a 
permissible loss of performance. If the minimum performance level or the permissible performance 
loss is not specified by the manufacturer, then either of these may be derived from the product 
description and documentation, and by what the user may reasonably expect from the equipment if 
used as intended. 
 
Performance criterion B 
After the test, the equipment shall continue to operate as intended without operator intervention. No 
degradation of performance or loss of function is allowed, after the application of the phenomena 
below a performance level specified by the manufacturer, when the equipment is used as intended. 
The performance level may be replaced by a permissible loss of performance. During the test, 
degradation of performance is allowed. However, no change of operating state or stored data is 
allowed to persist after the test. If the minimum performance level (or the permissible performance 
loss) is not specified by the manufacturer, then either of these may be derived from the product 
description and documentation, and by what the user may reasonably expect from the equipment if 
used as intended. 
 
Performance criterion C
 
Loss of function is allowed, provided the function is self-recoverable, or can be restored by the 
operation of the controls by the user in accordance with the manufacturer’s instructions. Functions, 
and/or information stored in non-volatile memory, or protected by a battery backup, shall not be lost.
 
 
 
 
 
 
 
 
 
 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 8 of 46 
3 General 
information 
3.1  Description of Equipment under test (EUT) 
Type of equipment 
Table top 
Floor standing 
Combination 
 
 
 
 
The equipment under test (EUT) is a Computer Speaker system. 
And  model name is on stage 200 ID. 
The input spec of the EUT: 100-240Vac  50/60Hz 0.5A (12 VDC, 1.25 A is output of the adapter 
for the Speaker). 
For technical data see table 1 in annex A. 
3.2  Measurement Uncertainly  
Radiated Emission Test : 30MHz-1000MHz     4.5dB 
                                                1GHz-18GHz           4.6dB 
Conducted Emission Test :
 9KHz-30MHz         3.5dB     
3.3  Test Mode (TM) 
TM 1) 
230V AC 50Hz power source was 
used during the test.  
Connect to PC 
TM 2) 
230V AC 50Hz power source was 
used during the test.  
Connect to Ipod 
Main Auxiliary Equipments list as below 
 
Equipment 
Type 
 
Serial No
Manufacturer 
PC P9111A 
#AB2  CN31104346 
Compact 
LCD monitor 
P4825 
CN3087 
Compact 
Adapter of LCD  
PA-1400-02 
-- 
Liteon 
Keyboard KB-0133 
01669394 
Compact 
mouse M-S69 
-- Compact 
printer BJC-265SP 
EVX81604 
Canon 
Adapter of printer 
AD-300 
-- 
Canon 
modem 56000BPS 
200060057 
Kpt 
Adapter of modem 
AM-1280AV 
-- 
Kpt 
IPOD A1136 
8K63899YZ9M 
APPLE 
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 9 of 46 
 
3.4  Climatic conditions  
 
parameter 
admissible range 
actual range 
 
Ambient temperature 
15 °C - 35 °C 
20°C -23°C 
O.K. 
Relative humidity 
30 % - 60 % 
51 % 
O.K. 
Atmospheric pressure 
86-106kPa 
100.1kPa O.K. 
 
3.5  Testing location   
Shenzhen Academy of Metrology and Quality Inspection (SMQ) Guangdong EMC Compliance 
Testin Center. 
 –ELA 502  
Bldg. of Shenzhen Academy of Metrology and Quality Inspection , Longzhu Road, Nanshan District, 
Shenzhen, China. 
 
All tests have been supervised by a Nemko engineer.  
 
Ident. Nr.: 
98323 
Date:  
2008-3-11 
 
98323__EMC_TRF 
page 10 of 46 
 
Measurement of conducted emission 
4.1 Standards 
Generic standard 
  
Product or product family standard 
EN 55022:2006 
Limit class 
Class B 
Basic standard 
CISPR 16 
Date of testing  
2008.2.27 
4.2 Measurement equipment 
 
Equipment 
Last Calibration 
Type 
 
Serial No
Manufacturer 
EMI Test Receiver 
January 25, 2008 ESCS30 
SB2603 
Rohde & Schwarz  
AMN 
January 25, 2008 ESH2-Z5 
SB3321 
Rohde & Schwarz  
Limiter 
January 30, 2008 ESH3-Z2 
SB3319/01 
Rohde & Schwarz  
4.3 Test set-up 
The test set-up was realized in a shielded chamber according to the above-mentioned standard. If 
more details are necessary, e.g. because of wiring or auxiliary equipment, annex B with a photo or a 
rough figure of the test set-up is attached. 
 
The test has been performed as following: 
1)  Preview test; Peak- and Average-Detector; measuring time 1 ms; 
frequency step 4 kHz; all lines; 
2)  Find frequencies with maximum emission: 
Acceptance-analysis: Limit minus 10dB 
Peak-reduction:10Peaks frequency range 150 kHz - 30 MHz 
3)  Final test; Quasi-Peak and Average-Detector; measuring time 1 s; 
at frequencies from step 2).
 IF Bandwidth: 9kHz
 
4)  If there are more than 10 peaks within the 10 dB margin a manual test with all settings is 
necessary to find the maximum readings. 
The EUT was placed on the top of an insulating table 0.8 meters above the ground at a shielded 
room. The EUT was placed 0.4 meters from the conducting wall of shielded room with EUT being 
connected to the power mains through a line impedance stabilization network (LISN). The LISN 
provide 50Ohm/50μH of coupling impedance for the measuring instrument. Both lines of the power 
mains connected to the EUT were checked for maximum conducted interference. The frequency 
range from 150kHz to 30MHz was searched.  The worst-case emissions are reported. 

Download JBL ON STAGE 200ID (serv.man3) EMC - CB Certificate

Here you can view online and download JBL ON STAGE 200ID (serv.man3) EMC - CB Certificate in PDF. ON STAGE 200ID (serv.man3) emc - cb certificate will guide through the process and help you recover, restore, fix, disassemble and repair JBL ON STAGE 200ID (serv.man3) Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.