Read JBL ON CALL (serv.man2) EMC - CB Certificate online
Page 2 of 99 ST-06153
TRF No.: IECEN60950_1A
Particulars: test item vs. test requirements
Equipment mobility ..................................... : Direct plug-in
Operating condition ..................................... : Continuous
Mains supply tolerance (%) ......................... : + 6 %, + 10 % and – 10 % (the test voltage + 10 % is
Equipment mobility ..................................... : Direct plug-in
Operating condition ..................................... : Continuous
Mains supply tolerance (%) ......................... : + 6 %, + 10 % and – 10 % (the test voltage + 10 % is
required by the manufacturer)
Tested for IT power systems ...................... : Yes
IT testing, phase-phase voltage (V) ........... : 230 V for Norway
Class of equipment ..................................... : Class II
Mass of equipment (kg) ............................... : Max. 0.11 kg
Protection against ingress of water ............ : IP20
Test case verdicts
IT testing, phase-phase voltage (V) ........... : 230 V for Norway
Class of equipment ..................................... : Class II
Mass of equipment (kg) ............................... : Max. 0.11 kg
Protection against ingress of water ............ : IP20
Test case verdicts
Test case does not apply to the test object : N/A (Not Applicable)
Test item does meet the requirement ......... : P (Pass)
Test item does not meet the requirement ... : F (Fail)
Testing
Test item does meet the requirement ......... : P (Pass)
Test item does not meet the requirement ... : F (Fail)
Testing
Date of receipt of test item .......................... : May 12, 2006
Date(s) of performance of test .................... : May 12, 2006 – May 17, 2006
General remarks
“This report is not valid as a CB Test Report unless appended by an approved CB Testing
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
The test result presented in this report relate only to the object(s) tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
“(see Appendix #)” refers to additional information appended to the report.
“(see appended table #)” refers to a table appended to the report.
Throughout this report a comma (point) is used as the decimal separator.
Additional information
Additional special deviations of CN (China) of IEC 60950, 3rd ed. are checked.
Date(s) of performance of test .................... : May 12, 2006 – May 17, 2006
General remarks
“This report is not valid as a CB Test Report unless appended by an approved CB Testing
Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02”.
The test result presented in this report relate only to the object(s) tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
“(see Appendix #)” refers to additional information appended to the report.
“(see appended table #)” refers to a table appended to the report.
Throughout this report a comma (point) is used as the decimal separator.
Additional information
Additional special deviations of CN (China) of IEC 60950, 3rd ed. are checked.
Click on the first or last page to see other ON CALL (serv.man2) service manuals if exist.