ON BEAT XTREME (serv.man8) - JBL Audio EMC - CB Certificate (repair manual). Page 105

Page 3 of 11 

Report No.: 171153  

 
 

ATTACHMENT 6 

Clause 

Requirement + Test 

Result - Remark 

Verdict

 

TRF No. IEC60065J 

3.2A 

Add the following clause: 

A component power supply complying with 
CAN/CSA-C22.2 No. 60950 is considered to 
comply with this construction and fault conditions  
of this Standard after taking into account any 
relevant conditions of acceptability. 

 

4.2.1 

Add the following after the fifth paragraph: 

For apparatus intended for use at nominal 120V 
ac, the apparatus shall comply with this standard 
at supply voltages between 108V and 125V.  For 
apparatus intended for use at nominal 240V ac the 
apparatus shall comply with this standard at supply 
voltages between 216V and 250V.   

Apparatus rated 100-240V, 
 

4.2.10 

Add the following after the second paragraph:   

As an alternative, a supply apparatus for general 
use complying with CSA/CSA-C22.2 No. 223 or 
CAN/CSA-C22.2 No. 60950 shall be acceptable. 

 

5 

Markings and instructions – adhesive nameplates

Add the following paragraph: 

Adhesive nameplates on commercial products 
shall comply with CSA C22.2 No 0.15. 

No commercial 

5.1 

Add the following item: 

j) Date of manufacture: a date or code identifying 
the period of manufacture shall be marked on the 
apparatus;  

Marked 

5.3A 

Add the following clause: 

Where a loudspeaker grille, removable from the  
outside, is relied on as part of the enclosure  
(see Clause 9.2), the following marking or  
equivalent shall be visible on the enclosure after  
removal of the grille: 

"Caution -
 To prevent electric shock hazard, replace grille." 

Alternatively, the symbol in Clause 5.2 b) shall be v
isible after removal of the grille, and the caution wo
rding above shall appear in the user instructions, a
ccompanied by the symbol. 

Compliance is checked by inspection. 

Not removable