Read JBL ON BEAT AIR (serv.man3) EMC - CB Certificate online
www.tuv.com
Page 6 of 116
Report No.: 11023927 001
TRF No. IEC60950_1B
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ................................................................:
Yes
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies)...........................: Dongguan Sunstrong Electric Machine
Company Limited.
Sunstrong Industrial Park, Sicun Administration
Zone, Tangxia Town, Dongguan, Guangdong, P.R.
China.
China.
General product information:
This test report covers models SSA-60W-x ab (see below table for variable) with appliance inlet
which are switching mode power supply intended to use for for use with information technology
equipment.
Top enclosure and bottom enclosure are sealed together by ultrasonic welding.
which are switching mode power supply intended to use for for use with information technology
equipment.
Top enclosure and bottom enclosure are sealed together by ultrasonic welding.
Max. ambient temperature +40°C.
Definition of variable:
Variable:
Range of variable:
Content:
x
12, 20 or 30
Indicate output voltage’s range, 12 represent for output
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
voltage from 12.0V – 18.0V; 20 represent for output
voltage from 18.1V – 30.0V; 30 represent for output
voltage from 30.1V – 48.0V;
a
120 - 480
3 digits, indicate 10 times output voltage in Vol., the
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
minimum step is 0.1V. eg: 120=12.0V, 480=48.0V.
b
010 - 360
3 digits, indicate 100 times output current in A, the
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
minimum step is 0.01A. eg: 010=0.1A, 360=3.6A.
Notes: All models have the same circuit diagram, PCB layout except for transformer, output rating and
some component ratings (see below table for detail).
some component ratings (see below table for detail).
Click on the first or last page to see other ON BEAT AIR (serv.man3) service manuals if exist.