Read JBL L8400P EMC - CB Certificate online
page 9 of 40
Ref.No.:415379
IEC 60065
Clause
Requirement - Test
Result - Remark
Verdict
TRF No.: I60065__C
12 MECHANICAL
STRENGTH
12.1.1 Bump
test
P
12.1.2
Vibration test
No connection or part that
might impair safety can
become loose
might impair safety can
become loose
P
12.1.3 Impact
test
P
12.2
Fixing of knobs, push buttons, keys and levers
P
12.3
Remote controls with hazardous live parts
N
12.4
Drawers (pull test 50 N, 10 s)
N
12.5
Antenna coaxial sockets providing isolation
N
13
CLEARANCES AND CREEPAGE DISTANCES
13.1
Clearances and creepage distances in accordance
with 13.2 (fig. 9); minimum distance ..................... :
with 13.2 (fig. 9); minimum distance ..................... :
Prim – sec=7.2mm
Prim – acc. metal parts=6mm
Prim – acc. metal parts=6mm
P
13.1.1
Reduction applied if the 3 conditions are met ....... : Yes, 1mm (see 14.5)
P
Reduction applied for Grade 2 winding wire ......... :
N
13.1.2
Use of cemented joints .......................................... :
N
Tests to confirm cemented joints
N
13.2
Clearances and creepage distances of parts of
different polarity connected to the mains, as in
fig. 9; minimum distance ....................................... :
different polarity connected to the mains, as in
fig. 9; minimum distance ....................................... :
6.4mm P
Clearances and creepage distances between
conductors on printed circuit boards, one of which may
be conductively connected to the mains, as in fig. 10
conductors on printed circuit boards, one of which may
be conductively connected to the mains, as in fig. 10
N
13.3
Enclosed, enveloped or hermetically sealed parts:
clearances and creepage distances to Table 4
clearances and creepage distances to Table 4
N
13.4
Parts filled with insulating compound, meeting the
requirements of 8.8
requirements of 8.8
N
13.5
Type B coated printed circuit boards complying
with IEC 60664-3 (basic insulation only)
with IEC 60664-3 (basic insulation only)
N
14 COMPONENTS
14.1
Resistors
a) Resistors between hazardous live parts and
accessible metal parts
accessible metal parts
N
a) Resistors separately approved ......................... :
N
b) Resistors, other than between hazardous live
parts and accessible parts
parts and accessible parts
N
b) Resistors separately approved ......................... :
N
Click on the first or last page to see other L8400P service manuals if exist.