Read JBL JSR 675 User Guide / Operation Manual online
9
12. VIDEO/AUDIO INPUT
(PLAY) JACKS OF VCR 1
(PLAY) JACKS OF VCR 1
Connect these jacks to the corre-
sponding AUDIO OUTPUT jacks of
your VCR.
sponding AUDIO OUTPUT jacks of
your VCR.
13. VIDEO/AUDIO OUTPUT
(REC) JACKS OF VCR 1
(REC) JACKS OF VCR 1
Connect these jacks to the corre-
sponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this
jack to the VIDEO INPUT jack of the
VCR. AUDIO REC jack: Connect
these jacks to the AUDIO INPUT
jacks of the VCR.
sponding INPUT jacks of a VCR.
VIDEO OUTPUT jack: Connect this
jack to the VIDEO INPUT jack of the
VCR. AUDIO REC jack: Connect
these jacks to the AUDIO INPUT
jacks of the VCR.
14. VIDEO/AUDIO INPUT
(PLAY) JACKS OF VCR 2
(PLAY) JACKS OF VCR 2
Connect these jacks to the corre-
sponding OUTPUT jacks of your VCR
or VDP.
sponding OUTPUT jacks of your VCR
or VDP.
15. VIDEO MONITOR JACK
Connect this jack to the VIDEO
INPUT jack of a TV/MONITOR.
INPUT jack of a TV/MONITOR.
16. REMOTE OUT JACK
Connect this jack to the REMOTE IN
jack on a Harman Kardon component.
Use one of the accessory mini-plug
cables.
jack on a Harman Kardon component.
Use one of the accessory mini-plug
cables.
You can control some Harman Kardon
components in your system using the
JSR675 remote commander.
components in your system using the
JSR675 remote commander.
17. MULTI-ROOM REMOTE
IN JACK
IN JACK
Connect a remote IR sensor to this
jack. You can operate the unit by
remote commander through the
adapter. It is convenient when the unit
is located in a separate room. (See
page 10)
jack. You can operate the unit by
remote commander through the
adapter. It is convenient when the unit
is located in a separate room. (See
page 10)
18. FRONT, CENTER, REAR
PRE OUT AND MAIN IN
JACKS
PRE OUT AND MAIN IN
JACKS
FRONT PRE OUT
When a separate power amplifier is
used to drive the front speakers,
connect the power amplifier input to
these jacks.
used to drive the front speakers,
connect the power amplifier input to
these jacks.
FRONT MAIN IN
When a separate pre-amplifier is
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
connected and this unit is used as a
power amplifier, connect the pre-
amplifier output to these jacks.
NOTE:
When you do not use the
PRE OUT and MAIN IN separately,
always connect the PRE OUT and
MAIN IN jacks with a jumper plug.
always connect the PRE OUT and
MAIN IN jacks with a jumper plug.
CENTER PRE OUT
When a separate power amplifier is
used to drive the center speaker,
connect the power amplifier input to
these jacks.
used to drive the center speaker,
connect the power amplifier input to
these jacks.
REAR PRE OUT
When a separate power amplifier is
used to drive the rear speaker, con-
nect the power amplifier input to
these jacks.
used to drive the rear speaker, con-
nect the power amplifier input to
these jacks.
19. SPEAKER TERMINALS
(1, 2 and CENTER)
(1, 2 and CENTER)
Connect the main left (L) and right (R)
speakers to the corresponding 1 and 2
speaker terminals. Connect the center
speakers to the corresponding 1 and 2
speaker terminals. Connect the center
speaker to the center (+), (-) terminals.
Make sure that the positive (+) and
negative (-) terminals on the speaker
are connected to the corresponding
terminals on the receiver.
Make sure that the positive (+) and
negative (-) terminals on the speaker
are connected to the corresponding
terminals on the receiver.
20. REAR SPEAKER
TERMINALS
TERMINALS
Connect rear speakers to the
corresponding terminals.
corresponding terminals.
21. AC INPUT CORD
Plug this cord in AC outlet on a wall.
22. SUBWOOFER OUT
When a powered subwoofer or
separate power amplifier is used to
power a subwoofer connect these
jacks to the input of the amplifier (for
subwoofer or powered subwoofer).
separate power amplifier is used to
power a subwoofer connect these
jacks to the input of the amplifier (for
subwoofer or powered subwoofer).
23. AC SWITCHED OUTLET
This outlet provides AC power. The
AC power is switched by the power
button. Use this outlet for a source
component, such as a CD player.
AC power is switched by the power
button. Use this outlet for a source
component, such as a CD player.
JSR675 OM (230V) 7/28/98 10:08 AM Page 11
Click on the first or last page to see other JSR 675 service manuals if exist.