JSR 655 - JBL Audio User Guide / Operation Manual. Page 7

6

to TUNER when the button is pressed.
When you select numbers from 10
through 29, you must select the
second digit within about 2 seconds.
To select preset 30, simply press 0.

Set TAPE 2 MONITOR button to the “off”
position when you want to hear the other
input functions. Press this button to monitor
the cassette deck connected to the TAPE
2 MON input jacks.

Press the button to select the desired input
function:  VCR 1, VCR 2, TAPE 1, TV/Aux,

Tuner, CD or Phono.

Push in this button to select the VCR 2
jacks on the front, rather than the VCR 2
jacks on the rear.

Connect to the VIDEO OUTPUT jack or a
VCR (Yellow jack).

Connect to the AUDIO OUTPUT jacks of a
VCR (Red and White jacks).

Press this button to compensate for the
response of the human ear at low listening

levels (known as the Fletcher-Munson
hearing curve). The high and low frequen-
cies are automatically boosted when this
button is pushed in. In the OFF position,
the frequency response is flat at all
volume levels. This button does not work
at high volume levels.

Turn the VOLUME clockwise to increase
the volume and counterclockwise to
decrease it. The volume of the front,
center, and rear channels is changed at
the same time.

This indicator moves in accordance
with the volume level. The indicator
blinks when the mute button on the
remote commander is pressed.

This window shows the state of
operation for easier control of the
receiver. It also contains the IR 
Remote Sensor.

 JSR655om (a) qx  7/28/98 9:54 AM  Page 8