Read JBL ES 150PW (serv.man5) EMC - CB Certificate online
Page 20 of 58
Report No.: 1009950
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
17.6
Stranded conductors of flexible supply cords carrying
a current > 0,2 A with screw terminals not
consolidated by solder
a current > 0,2 A with screw terminals not
consolidated by solder
N/A
17.7
Cover fixing devices other than screws have
adequate strength and their positioning is
unambiguous
adequate strength and their positioning is
unambiguous
N/A
17.8
Fixing devices for detachable legs or stands
provided
provided
N/A
17.9
P
18
Mechanical strength of picture tubes and protection against the effects of
implosion
implosion
Picture tube separately approved to IEC 61965 ....:
N/A
Picture tube separately approved to 18.1 . .............:
N/A
18.1
Picture tubes >16 cm intrinsically protected
N/A
Non-intrinsically protected tubes >16 cm used with
protective screen
protective screen
N/A
Protective film as part of implosion protection: edges
covered by enclosure
covered by enclosure
N/A
18.2
Intrinsically protected tubes: tests on 12 samples
N/A
18.2.1
Samples subject to ageing: 6 samples
N/A
18.2.2
Samples subject to implosion test: 6 samples
N/A
18.2.3
Samples subject to mechanical strength test (steel
ball): 6 samples
ball): 6 samples
N/A
18.3 Non-intrinsically
protected tubes tested to 18.3
N/A
19
Stability and mechanical hazards
Mass of the equipment exceeding 7 kg . ................: 15.5kg
P
Apparatus intended to be fastened in place –
suitable instructions ................................................:
suitable instructions ................................................:
N/A
19.1
Test on a plane, inclined at 10
o
to the horizontal
P
19.2
100 N force applied vertically downwards
P
19.3
100 N force, or 13% of weight, applied horizontally to
point of least stability
point of least stability
N/A
19.4
Edges or corners not hazardous
P
19.5
Glass surfaces (exclaminated) with an area
exceeding 0,1 m² or maximum dimension > 450 mm,
pass the test of 19.5.1
exceeding 0,1 m² or maximum dimension > 450 mm,
pass the test of 19.5.1
N/A
19.6
Wall or ceiling mountings adequate
N/A
Click on the first or last page to see other ES 150PW (serv.man5) service manuals if exist.