Read Harman Kardon GPS 500 EMC - CB Certificate online
<11006065 001>
Page 8 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1.7.2
Safety instructions
User’s manual provided as
follows:
- maximum operation ambient
- maximum operation ambient
temperature;
- electrical data.
P
1.7.3
Short duty cycles
Equipment is designed for
continuous operation.
N
1.7.4
Supply voltage adjustment ................................. : Full range voltage design, no
necessary adjustment.
N
Methods and means of adjustment; reference to
installation instructions ....................................... :
Ditto.
N
1.7.5
Power outlets on the equipment ........................ : No outlets provided.
N
1.7.6
Fuse identification (marking, special fusing
characteristics, cross-reference) ........................ :
Marking on PCB adjacent to
fuse: RF / F1 2A T 250V
P
1.7.7
Wiring terminals
See below.
N
1.7.7.1
Protective earthing and bonding terminals ......... : Class II equipment.
N
1.7.7.2
Terminal for a.c. mains supply conductors
Direct plug-in equipment.
N
1.7.7.3
Terminals for d.c. mains supply conductors
No d.c. mains supply.
N
1.7.8
Controls and indicators
See below.
N
1.7.8.1
Identification, location and marking .................... : No switch or safety involved
indicator.
N
1.7.8.2
Colours .............................................................. : No indicators.
N
1.7.8.3
Symbols according to IEC 60417........................ : No symbols used.
N
1.7.8.4
Markings using figures ...................................... : No figures used.
N
1.7.9
Isolation of multiple power sources .................... : Only one supply from the
mains.
N
1.7.10
IT power distribution systems
Shall be evaluated when
submitted for Norway national
approval.
N
1.7.11
Thermostats and other regulating devices
No thermostats provided.
N
1.7.12
Language(s) ....................................................... : User manual in German and
English and marking rating in
English. Versions in other
languages will be provided when
national certificate approval.
1.7.13
Durability
The labels were subjected to
the permanence of marking
test. The labels were rubbed
with cloth soaked with water for
15 s and then again for 15 s
with the cloth soaked with
petroleum spirit.
P
Click on the first or last page to see other GPS 500 service manuals if exist.