Read Harman Kardon GPS 500 EMC - CB Certificate online
<11006065 001>
Page 6 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
1
GENERAL
P
1.5
Components
P
1.5.1
General
See below.
P
Comply with IEC 60950 or relevant component
standard
Components which were found
to affect safety aspects comply
with the requirements of this
standard or with the safety
aspects of the relevant IEC/EN
component standards (see
appended table 1.5.1).
P
1.5.2
Evaluation and testing of components
Components that are certified
to IEC and /or national
standards are used correctly
within their ratings.
Components not covered by
IEC standards are tested under
the conditions present in the
equipment.
P
1.5.3
Thermal controls
No thermal controls.
N
1.5.4
Transformers
Transformer used is suitable for
the intended application and
comply with the relevant
requirements of the standard
and particularly with those of
Annex C.
P
1.5.5
Interconnecting cables
Interconnection o/p cable to
other device is carrying only
SELV on an energy level below
240VA.
→
Except for the insulation
material, there are no further
requirements for the o/p
interconnection cable.
P
1.5.6
Capacitors in primary circuits ............................. : Between lines: X2 capacitor
according to IEC 60384-14:1993
with 21 days damp heat test was
used.
P
1.5.7
Double insulation or reinforced insulation bridged
by components
See below.
P
1.5.7.1
General
Ditto.
P
1.5.7.2
Bridging capacitors
Primary and secondary bridged
by one capacitor (C8), which
used was certified as Y1
capacitor according to IEC
60384-14/1993.
P
1.5.7.3
Bridging resistors
No bridging resistors.
N
Click on the first or last page to see other GPS 500 service manuals if exist.