Read Harman Kardon SOUNDSTICKS III (serv.man2) EMC - CB Certificate online
IEC 60950-1 (ed.2)
- Page 6 of 7 -
www.nemko.com
Report No. 158002
4.7.3.1
Equipment for use in environmental air space
other than ducts or plenums provided with metal
enclosure or with non-metallic enclosure having
adequate fire-resistance and low smoke
producing characteristics (according to UL 2043).
Equipment for installation in space used for
environmental air, described in Sec. 300-22(c) of
the NEC, provided with instructions indicating
suitability for installation
other than ducts or plenums provided with metal
enclosure or with non-metallic enclosure having
adequate fire-resistance and low smoke
producing characteristics (according to UL 2043).
Equipment for installation in space used for
environmental air, described in Sec. 300-22(c) of
the NEC, provided with instructions indicating
suitability for installation
Equipment not used in
environmental air space.
environmental air space.
N/A
4.7.3.1
Flame spread rating for external surface of
combustible material with exposed area greater
than 0.93 m² or a single dimension greater than
1.8 m; 50 or less for computer room applications
or 200 or less for other applications.
combustible material with exposed area greater
than 0.93 m² or a single dimension greater than
1.8 m; 50 or less for computer room applications
or 200 or less for other applications.
The equipment has no
combustible material greater
than 0.9m2 or single dimension
greater than 1.8m.
combustible material greater
than 0.9m2 or single dimension
greater than 1.8m.
N/A
4.7.3.4
Wire marked "VW-1" or "FT-1" considered
equivalent.
equivalent.
Considered.
P
5.1.8.2
Special earthing provisions and instructions for
equipment with high touch current due to
telecommunication network connections.
equipment with high touch current due to
telecommunication network connections.
No TNV Circuity.
N/A
5.1.8.3
Touch current due to ringing voltage for
equipment containing telecommunication network
leads.
equipment containing telecommunication network
leads.
No TNV Circuity.
N/A
5.3.7
Overloading of SELV connectors and printed
wiring board receptacles accessible to the
operator.
wiring board receptacles accessible to the
operator.
See main test report table 5.3
P
5.3.7 Tests
interrupted
by opening of a component
repeated two additional times.
See main test report table 5.3
P
5.3.9.1
Test interrupted by opening of wire or trace
subject to certain conditions.
subject to certain conditions.
Considered.
P
6
Specialized instructions for telephones that may
be connected to a telecommunications network
be connected to a telecommunications network
No TNV Circuity.
N/A
6
Marking identifying function of telecommunication
type connectors not used for connection to a
telecommunication network.
type connectors not used for connection to a
telecommunication network.
No TNV Circuity.
N/A
6.3
Equipment remotely powered over
telecommunication wiring systems provided with
specialized markings adjacent to the connection.
telecommunication wiring systems provided with
specialized markings adjacent to the connection.
No TNV Circuity.
N/A
6.3
Overcurrent protection incorporated into
equipment to provide power over
telecommunication wiring system not
interchangeable with devices of higher ratings if
operator replaceable.
equipment to provide power over
telecommunication wiring system not
interchangeable with devices of higher ratings if
operator replaceable.
No TNV Circuity.
N/A
6.4
Additional requirements for equipment connected
to a telecommunication network using cable
subject to overvoltage from power line failures
to a telecommunication network using cable
subject to overvoltage from power line failures
No TNV Circuity.
N/A
6.4
Where 26 AWG line cord required by Fig. 6C,
either the cord is provided with the equipment or
described in the safety instructions.
either the cord is provided with the equipment or
described in the safety instructions.
No TNV Circuity.
N/A
7
Equipment associated with the cable distribution
system may need to be subjected to applicable
parts of Chapter 8 of the NEC.
system may need to be subjected to applicable
parts of Chapter 8 of the NEC.
Not cable distribution systems.
N/A
H
Ionizing radiation measurements made under
single fault conditions according to 21 CFR 1020
single fault conditions according to 21 CFR 1020
The equipment does not produce
ionizing radiation
ionizing radiation
N/A
Click on the first or last page to see other SOUNDSTICKS III (serv.man2) service manuals if exist.