Read Harman Kardon SOUNDSTICKS III (serv.man2) EMC - CB Certificate online
IEC 60950-1 (ed.2)
- Page 5 of 7 -
www.nemko.com
Report No. 158002
3.3.6
Field wiring terminals marked to indicate the
material(s) of the conductor for the terminals
used
material(s) of the conductor for the terminals
used
Class III equipment.
N/A
3.3.6
Aluminum conductors not permitted for
connection to terminal for equipment earthing
conductor
connection to terminal for equipment earthing
conductor
Class III equipment.
N/A
3.3.6
Field wiring connections made through the use of
suitable pressure connectors (including set screw
type), solder lugs or splices to flexible leads.
suitable pressure connectors (including set screw
type), solder lugs or splices to flexible leads.
Class III equipment.
N/A
3.4.2
Separate motor control device(s) required for
cord-connected equipment rated more than 12 A,
or with motor rated more than 1/3 hp or more
than 120 V.
cord-connected equipment rated more than 12 A,
or with motor rated more than 1/3 hp or more
than 120 V.
No such motors in the
equipment.
equipment.
N/A
3.4.8 Vertically
mounted
disconnect devices oriented
so up position of handle is "on".
No switch acting as disconnect
device
device
N/A
3.4.11
For computer-room applications, equipment with
battery systems capable of supplying 750 VA for
5 minutes provided with battery disconnect
means
battery systems capable of supplying 750 VA for
5 minutes provided with battery disconnect
means
No battery capable of supplying
750VA.
750VA.
N/A
4.2.8.1
Special opening restrictions for enclosures
around CRTs with face dimension of 160 mm or
more.
around CRTs with face dimension of 160 mm or
more.
No used CRT.
N/A
4.2.9
Compartment housing high-pressure lamp
marked to indicate risk of explosion.
marked to indicate risk of explosion.
No used.
N/A
4.2.11
For equipment mounted on racks and provided
with slide/rails allowing the equipment to slide
away from the rack for installation and
maintenance, additional construction,
performance and marking requirements are
applicable to determine the adequacy of the
slide/rails
with slide/rails allowing the equipment to slide
away from the rack for installation and
maintenance, additional construction,
performance and marking requirements are
applicable to determine the adequacy of the
slide/rails
No used
N/A
4.3.2
Loading test for equipment with handle(s) used to
support more than 9 kg
support more than 9 kg
No handle used.
N/A
4.3.6
In addition to the IEC requirements, Direct Plug-
in Equipment complies with UL 1310
in Equipment complies with UL 1310
Class III equipment.
N/A
4.3.12
The max. quantity of flammable liquid stored in
equipment per ANSI/NFPA 30 (Table NAE.6)
equipment per ANSI/NFPA 30 (Table NAE.6)
No flammable liquids within the
equipment.
equipment.
N/A
4.3.12
Equipment using replenishable liquids marked to
indicate type of liquid to be used.
indicate type of liquid to be used.
No flammable liquids within the
quipment.
quipment.
N/A
4.3.13.2 Equipment that produces x-radiation and does
not comply with 4.3.12 under all conditions of
servicing marked to indicate the presence of
radiation
servicing marked to indicate the presence of
radiation
The equipment does not produce
ionizing radiation.
ionizing radiation.
N/A
4.3.13.5 Requirements contained in the applicable
national codes apply to lasers (21 CFR 1040).
Diffusive LED only
N/A
4.7
Automated information storage equipment
intended to contain more than 0.76 m³ of
combustible media requires provision for
automatic sprinklers or a gaseous agent
extinguishing system.
intended to contain more than 0.76 m³ of
combustible media requires provision for
automatic sprinklers or a gaseous agent
extinguishing system.
The equipment has no
combustible area greater than
0.76 m³.
combustible area greater than
0.76 m³.
N/A
Click on the first or last page to see other SOUNDSTICKS III (serv.man2) service manuals if exist.