Read Harman Kardon SIGNATURE 1.3 (serv.man5) User Guide / Operation Manual online
Front and Rear Panels
4
Signature 1.3
¡
Speaker Outputs:
Connections from these terminals
should be made to the appropriate speakers in your
system.
system.
™
Audio Inputs:
Connect the outputs of the
Signature 2.0, or other surround processor, preamplifier or
decoder to these jacks.
decoder to these jacks.
£
AC Power Cord:
Connect this plug to a wall-
mounted AC outlet. Due to the current draw of the
Signature 1.3, it is NOT recommended that the accessory
outlets on the back of the audio/video components be
used to power this product.
Signature 1.3, it is NOT recommended that the accessory
outlets on the back of the audio/video components be
used to power this product.
¢
Power Amp Trigger In:
Connect this jack to the
matching trigger output on a Signature2.0 or other
compatible device to have the 1.3 automatically turn on
when the device is activated. See page 5 for additional
details.
compatible device to have the 1.3 automatically turn on
when the device is activated. See page 5 for additional
details.
CHANNEL THREE (FRONT LEFT)
4
Ω
MIN.
SPEAKER
IN
3
AC INPUT
POWER AMP
TRIGGER IN
AC 230V/50Hz 950W
CHANNEL TWO (FRONT CENTER)
4
Ω
MIN.
SPEAKER
IN
2
CHANNEL ONE (FRONT RIGHT)
SPEAKER
IN
1
4
Ω
MIN.
£
¢
™
¡
Rear Panel Connections
On/Off
1
2
3
Front Panel Controls
1
Power Switch:
Press this switch to turn the 1.3 on for
manual operation, or to place it in the Standby mode for
automatic/remote turn-on when the 1.3 is connected to a
device with a compatible trigger circuit.
automatic/remote turn-on when the 1.3 is connected to a
device with a compatible trigger circuit.
2
Power On Indicator:
When the word
S
IGNATURE
is
illuminated in blue, the 1.3 is in a normal operating
condition.
condition.
3
LED Indicator:
The color of this indicator varies with
the status of the 1.3. It is red when the unit is off, amber
in the standby mode, and flashing green during warm-up.
If the indicator flashes and alternates between red and
amber, the 1.3 is in the protect mode, indicating a
problem in the unit or connections to the speakers.
in the standby mode, and flashing green during warm-up.
If the indicator flashes and alternates between red and
amber, the 1.3 is in the protect mode, indicating a
problem in the unit or connections to the speakers.
Click on the first or last page to see other SIGNATURE 1.3 (serv.man5) service manuals if exist.