Read Harman Kardon SIGNATURE 1.3 (serv.man5) User Guide / Operation Manual online
Unpacking and Installation
3
Signature 1.3
Cleaning
When the unit gets dirty, wipe it with a clean, soft and dry
cloth. If necessary, first wipe the surface with a soft cloth
slightly dampened with mild soapy water, followed by a
fresh cloth with clean water. Wipe immediately with a
dry cloth. Never use benzene, thinner, alcohol or any
other volatile cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.
cloth. If necessary, first wipe the surface with a soft cloth
slightly dampened with mild soapy water, followed by a
fresh cloth with clean water. Wipe immediately with a
dry cloth. Never use benzene, thinner, alcohol or any
other volatile cleaning agent. Do not use abrasive cleaners,
as they may damage the finish of metal parts. Avoid
spraying insecticide near the unit.
Moving the Unit
Before moving the unit, be certain to disconnect any
interconnection cords with other components, and make
certain that you disconnect the unit from the AC outlet.
interconnection cords with other components, and make
certain that you disconnect the unit from the AC outlet.
Typographic Conventions
In order to help you use this manual with the front panel
controls and rear panel connections, certain conventions
have been used.
controls and rear panel connections, certain conventions
have been used.
EXAMPLE
– (bold type) indicates a specific front
panel control or rear panel connection
1 – (number in a square) indicates a specific front
panel control
panel control
¡ – (number in a circle) indicates a rear panel connection
Unpacking and Installation
The carton and shipping materials used in protecting your
new amplifier were specially designed to cushion it from
the shocks and vibration of shipping. We suggest that you
save the carton and packing materials for use in shipping
if you move or if the unit ever needs repair.
new amplifier were specially designed to cushion it from
the shocks and vibration of shipping. We suggest that you
save the carton and packing materials for use in shipping
if you move or if the unit ever needs repair.
To minimize the size of the carton in storage, you may
wish to flatten it. Carefully remove any staples used to
close carton seams; carefully slit the tape on the bottom
and collapse the carton. Other cardboard inserts may be
stored in the same manner. Packing materials that cannot
be collapsed should be saved along with the carton in a
plastic bag.
wish to flatten it. Carefully remove any staples used to
close carton seams; carefully slit the tape on the bottom
and collapse the carton. Other cardboard inserts may be
stored in the same manner. Packing materials that cannot
be collapsed should be saved along with the carton in a
plastic bag.
When positioning the amplifier in its final location, make
certain that it has adequate ventilation on all sides, as well
as on the top and bottom. Do not place CDs, record
jackets, owner’s manuals or other paper on top of, or
beneath the unit, or in between multiple amplifiers in a
stack. This will block the air flow, causing degraded
performance and a possible fire hazard. If the unit is to be
enclosed in a cabinet or rack, make certain that there is
adequate air circulation, with means provided for hot air
to exit and for cool air to be brought in.
certain that it has adequate ventilation on all sides, as well
as on the top and bottom. Do not place CDs, record
jackets, owner’s manuals or other paper on top of, or
beneath the unit, or in between multiple amplifiers in a
stack. This will block the air flow, causing degraded
performance and a possible fire hazard. If the unit is to be
enclosed in a cabinet or rack, make certain that there is
adequate air circulation, with means provided for hot air
to exit and for cool air to be brought in.
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir
FRANCE
72500 Château-du-Loir
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
described in this owner’s manual is in compliance
with technical standards:
EN 55 013/6.1990
EN 55 020/12.1994
EN 55 022/5.1995
EN 60 065/1993
EN 60 555-2-3/1987/88
Steen Michaelsen
Harman Kardon Europe 12/99
Click on the first or last page to see other SIGNATURE 1.3 (serv.man5) service manuals if exist.