Read Harman Kardon SB 16 (serv.man9) EMC - CB Certificate online
Clause
Requirement - Test
Result - Remark
Verdict
TÜV SÜD Product Service GmbH
Report reference No.:081-61102-000
Electrical Safety
F10Y2-X dev.DOC
Ridlerstr. 65
2006-11-02
D-80339 München
Page 38 of 52
Test Report National land Group Differences IEC 60065 7
th
Ed. Rev. 00 / 2006-02
15.3.5
- Revise 2nd paragraph to read: “For rated
currents exceeding 13 A, reference is made to
Article 310 of the National Electrical Code,
ANSI/NFPA 70.”
currents exceeding 13 A, reference is made to
Article 310 of the National Electrical Code,
ANSI/NFPA 70.”
Table 15 - Replace with: “Nominal cross-
sectional area AWG“ and modify values.
sectional area AWG“ and modify values.
No applied for.
N
15.4
- Add: ”Component power supply adaptors
complying with the construction and test
requirements of UL 1310, UL 1950 Third Edition,
or UL 60950 are considered to fulfill the test
requirements on the clause.”
complying with the construction and test
requirements of UL 1310, UL 1950 Third Edition,
or UL 60950 are considered to fulfill the test
requirements on the clause.”
Ditto. N
16.1
- Modification: Mains supply flexible cords shall
comply with UL 817, be marked VW-1, and have
an ampacity not less than the current drawn by
the apparatus. Delete references to IEC 602227,
60245 and 60173.
comply with UL 817, be marked VW-1, and have
an ampacity not less than the current drawn by
the apparatus. Delete references to IEC 602227,
60245 and 60173.
Table 17A - Add: Types of cords and cord
lengths for various types of apparatus.
lengths for various types of apparatus.
Ditto.
N
16.2
- An integral earthing conductor shall be at least
the same size as the other cord conductors.
Substitute “IEC 60950, table 3B” with “Article 400
of the National Electrical Code”.
the same size as the other cord conductors.
Substitute “IEC 60950, table 3B” with “Article 400
of the National Electrical Code”.
Table 18 – Replace with “Wire sizes of external
flexible cords” Upper current limit in column 1
increased from 16 to 30 A and “AWG” wire sizes
added.
flexible cords” Upper current limit in column 1
increased from 16 to 30 A and “AWG” wire sizes
added.
Ditto.
N
16.3
- Add: c) Flexible cords not complying with 16.1,
used as connection between the apparatus and
other apparatus used in combination with it, shall
be marked VW-1.
used as connection between the apparatus and
other apparatus used in combination with it, shall
be marked VW-1.
Ditto.
N
17.8
- Expanded to include all cart/stand parts
supplied by the manufacturer, such as casters
and brackets.
supplied by the manufacturer, such as casters
and brackets.
Suitable assembly instructions required. Add:
"Relevant fixing means are not required when
installation is to be done by a skilled person."
"Relevant fixing means are not required when
installation is to be done by a skilled person."
Added. P
17.10
- Add: Aluminum conductors used as internal
wiring shall be terminated by a method capable
of being used in the combination of metals
involved at the connection point.
wiring shall be terminated by a method capable
of being used in the combination of metals
involved at the connection point.
No applied for.
N
17.11
- Add: An accessory shall be investigated to
determine that: a) The accessory, and the
combination of the accessory and the apparatus
shall present no hazard in the sense of this
standard and b) The accessory is provided with
installation instructions.
determine that: a) The accessory, and the
combination of the accessory and the apparatus
shall present no hazard in the sense of this
standard and b) The accessory is provided with
installation instructions.
Considered. P
Click on the first or last page to see other SB 16 (serv.man9) service manuals if exist.