MS 100 - Harman Kardon Audio Service Manual (repair manual). Page 8

Read Harman Kardon MS 100 Service Manual online

14
SyStem:
Power output: 30 watts per channel, 20Hz – 20kHz,  
THD < 0.07%, into 6 ohms, both channels driven
Bandwidth: 57Hz – 27kHz, – 6dB
System frequency response: 65Hz – 20kHz, ±3dB
Signal-to-noise ratio, A-weighted: 75dB
Channel separation: >
– 60dB
Crosstalk between sources: <–60dB
Line-level input sensitivity at 1kHz: 1.0V RMS, ±1dB
LouDSpeaKerS:
Low-frequency transducers: Two 125mm felted-paper  
drivers, ported
High-frequency transducers: Two 19mm titanium- 
laminate domes
Nominal impedance: 6 ohms
Sensitivity (2.83V/1m): 87dB
Frequency response: 80Hz – 20kHz (±3dB)
fm tuner SectIon:
Frequency range: 87.5 – 108.0MHz
Usable sensitivity: IHF 1.3µV/13.2dBf
Signal-to-noise ratio: mono/stereo 70/65dB
Distortion: mono/stereo 0.15/0.3%
Stereo separation: 35dB @ 1kHz, 100% deviation @ 65dBf
Selectivity: ±300kHz: 65dB
Image rejection: 80dB
IF rejection: 90dB
Tuner output level: 1kHz, ±50kHz, Dev 500mV
Number of presets: six
RDS capability: PTY (program type), PS (program service),  
Text (radio text)
cD SectIon:
Disc compatibility: CD, CD-R, CD-RW, enhanced CD, MP3, WMA
THD+N (20Hz – 20kHz): <0.01%
Frequency response: 0dBr ±0.5
Channel separation: >
–65dB
Signal-to-noise ratio: 
 • “A” WTG >100dBr
 • 22kHz filter > 100dBr
VIDeo outputS:
Composite video: 1.0V (pk-pk), 75
Ω, negative sync
S-video: 
  (Y) 1.0V (pk-pk), 75
Ω, negative sync
  (C) 0.286V (pk-pk), 75
Ω
GeneraL:
Power requirement: DC 24V, 5A power supply;  
works for AC 230V/50Hz
Power consumption: <1W standby, 80W maximum 
(both channels driven)
Operating temperature: 0°C to 35°C
Dimensions (H x W x D): 252mm x 488mm x 194mm 
Weight: 8.2kg
Features, specifications and appearance are subject to change without notice.
Harman Kardon is a trademark of Harman International Industries, 
Incorporated, registered in the United States and/or other countries. 
Designed to Entertain is a trademark of Harman International Industries, 
Incorporated.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. 
iPod not included. “Made for iPod” means that an electronic accessory has 
been designed to connect specifically to iPod and has been certified by the 
developer to meet Apple performance standards. Apple is not responsible 
for the operation of this device or its compliance with safety and regulatory 
standards.
Please register your product at www.harmankardon.com. You’ll need your 
product’s serial number. At the same time, you can choose to be notified 
about new products and/or special promotions.
MS 100 TeChnICaL SPeCIFICaTIOnS
0129CSK - MS-100 OM Inlay_v2.indd   14
21/04/09   10:07:39
harman/kardon
MS 100Eup/230 Service Manual
Page 8 of 39
Page of 39
Display

Click on the first or last page to see other MS 100 service manuals if exist.