Read Harman Kardon MS 100 Service Manual online
7
English
reMOTe COnTrOL FUnCTIOnS
Standby: Powers down the MS 100 to Standby mode,
where power is only available to the clock and alarm functions.
To completely power off the unit, unplug the power supply.
power on: Turns the MS 100 on.
track-Skip/Scan/tuning up/Down: These buttons
function differently, depending on which source has been
selected:
ipod or cD:
•
Press and release to skip to the next
track. Press the reverse button twice to skip to the previ-
ous track. Press and hold to scan forward or in reverse
within a track.
fm radio:
•
See Tuning on this page.
play/pause/memory: This button functions differently,
depending on which source has been selected:
ipod or cD:
•
Each press toggles between the Play and
Pause functions. Press and hold to fully stop playback.
fm radio:
•
If the current station has not been programmed
into a preset, the station is stored as a preset. If all of the
preset positions have been used, the new preset will over-
write the existing one. If the current station has previously
been programmed as a preset, the preset will be erased after
2 seconds.
Source Select: Each press changes the current source in
this order: FM, CD, AUX LINE IN 1 (rear-panel 3.5mm analog
input), AUX LINE IN 2 (front panel), AUX LINE IN 3 (rear-panel
dual RCA jacks), AUX DIGITAL IN, iPod.
Tuning Mode: Used with FM radio, each press toggles between
Auto and Manual tuning.
playback mode: Used only for iPod or CD playback, each
press changes the repeat and random (shuffle) playback mode.
See page 12 for the modes available with each source. When
the MS 100 is turned off or when the source is changed, the
playback mode returns to Normal.
Sleep: Each press increases the time until turn-off, from 10
to 90 minutes, in increments of 10 minutes. The next press
after the 90 minutes setting turns off the Sleep function.
clock adjust mode: With the MS 100 in Standby mode,
press this button to adjust the clock. Use the / Navigation
Buttons to adjust the hour, minute and 12/24 settings. To
change between AM and PM, increase or decrease the hour.
Press the / Buttons to move the cursor to the previous or
next position. Press this button again at any time when finished.
alarm adjust mode: With the MS 100 in Standby mode,
press this button to adjust the alarm. Use the / Navigation
Buttons to adjust the hour, minute and wake-up source settings.
To change between AM and PM, increase or decrease the hour.
Press the / Buttons to move the cursor to the previous or
next position. Press this button again at any time when finished.
preset Search: Used for FM radio to select the next or
previous preset station, if any have been programmed.
eject: When a CD is loaded, press this button to eject it.
tuning: Used for FM radio. Press and release to tune to
the next higher or lower station by one frequency increment.
Press and hold to scan quickly through the stations. When you
release the button, if Auto tuning mode is active, the tuner
continues to scan until it finds a station of acceptably strong
signal quality, and then it stops. In Manual tuning mode, the
tuner stops immediately at the current frequency.
/ / /
navigation Buttons: Used with the iPod to
navigate its menus, or in Standby mode to adjust the clock
or alarm. The / Buttons are used for scrolling. Press the
Button to select the current item, and the Button to display
the menu or return to the previous menu screen.
mute: Press to temporarily silence the speakers. Press again
to restore audio. Muting is canceled if the MS 100 is turned off.
Volume controls: Increases or decreases the volume.
Press and hold either button to change the volume more quick-
ly.
0129CSK - MS-100 OM Inlay_v2.indd 7
21/04/09 10:07:36
harman/kardon
MS 100Eup/230 Service Manual
Page 5 of 39
Click on the first or last page to see other MS 100 service manuals if exist.