MS 100 - Harman Kardon Audio Service Manual (repair manual). Page 3

Read Harman Kardon MS 100 Service Manual online

5
English
 message Display: The time and messages are displayed  
on top of the unit. 
on/Standby: Press to turn the MS 100 on or to place it 
in Standby mode. Press and hold for 2 seconds to disarm the 
alarm. To completely power off the unit, unplug the power sup-
ply.
Source: Each press changes the current source in this order: 
FM, CD, AUX LINE IN 1 (rear-panel 3.5mm analog input), AUX 
LINE IN 2 (front panel), AUX LINE IN 3 (rear-panel dual RCA 
jacks), AUX DIGITAL IN, iPod.
Volume controls: Increases or decreases the volume. 
Press and hold to change the volume more quickly. Press both 
together to mute.
play/pause/memory: This button functions differently, 
depending on which source has been selected:
 ipod or cD: 
Each press toggles between the Play and 
Pause functions. Press and hold to fully stop playback.
fm radio:
 If the current station has not been pro-
grammed into a preset, the station is stored as a preset. If 
all of the preset positions have been used, the new preset 
will overwrite the existing one. If the current station has 
previously been programmed as a preset, the preset will 
be erased after 2 seconds.
Skip/Scan forward/reverse: These buttons function 
differently, depending on the current source:
iPod or CD: Press and release to skip to the next track.  
Press the reverse button twice to skip to the previous 
track. Press and hold to scan forward or reverse within a 
track.
 FM Radio: Press and release to tune to the next higher or 
lower station by one frequency increment. Press and hold 
to scan quickly through the stations. When you release the 
button in Auto tuning mode, the tuner continues to scan 
until it finds a station of acceptably strong signal quality, 
and then it stops. In Manual tuning mode, the tuner stops 
immediately at the current frequency.
Headphone Jack: Outputs a stereo signal for private  
listening through most headphones that are equipped with  
a 3.5mm plug.
auX-In Jack (analog Input 2): Connect the included 
3.5mm male-to-male cable to the headphone or line-level  
output on a portable player or other device. 
cD Slot: Load compatible discs here.
eject: When a CD is loaded, press this button to eject it.
 
Dock for ipod: 
Gently insert the dock into the opening  
on the left side of the MS 100, snap in the correct adapter  
(or use the one supplied by Apple, Inc., with the iPod) and install 
a compatible iPod (see page 4).
Message Display
Dock for iPod (Install Here)
CD Slot
Eject
On/Standby
Source
Volume Up
Volume Down
Play/Pause
Skip/Scan Forward
Skip/Scan Reverse
Headphone Jack
AUX Line-In 2
FrOnT-PaneL COnTrOLS
0129CSK - MS-100 OM Inlay_v2.indd   5
21/04/09   10:07:35
harman/kardon
MS 100Eup/230 Service Manual
Page 3 of 39
Page of 39
Display

Click on the first or last page to see other MS 100 service manuals if exist.