Read Harman Kardon HS 500 (serv.man2) EMC - CB Certificate online
Report No. JSH006030498-001
Page 66 of 82
17.2 Block Diagram of Test Setup
The surg
k.
ecoup
er
e surge
The EU
by 1.8m
in size, s
to satisfy its
2 meters.
he surg
wer supply terminals .
17.3.1 Photo for test set-up
none
17.4 Test Protocol
Temperature :
23
°C
Relative Humidity:
34%
Test No.
Test
levelkV
Phase
°
Polarity
Diff. /
Com.
Result Comment
17.3 Test Setup and Test Procedure
e is to be applie
power supply terminals via the capacitiv
networ
ling networks are required in order to avoid possible adverse effects on equipment not und
nce to th
tional requirements
T was placed on a 0.8m high wooden table, standing on a ground reference plane 2.6m
upplied by the coupling-decoupling network (Best EMC). arranged and connected
between the EUT and the
GRP
d to the EUT
e coupling
D
test that may be powered by the same lines and to provide sufficient decoupling impeda
wave so that the specified wave may be developed on the lines under test.
The EUT was arranged and connected according to its func
test that may be powered by the same lines and to provide sufficient decoupling impeda
wave so that the specified wave may be developed on the lines under test.
The EUT was arranged and connected according to its func
functional requirement and the power code
oupling/decoupling network was less than
c
T
T
e is applied to the EUT po
1 1
0
°,90°,
180
°,270°
+/-, L-N
Diff.
Pass
2 2
0
°,90°,
180
°,270°
+/-, L-PE
Com.
NA
3 2
0
°,90°,
180
°,270°
+/-, N-PE
Com.
NA
4 0.5
DC
port
DC
Diff.
NA
Notes: “NA” means not applicable.
17.5 Additions, Deviations and Exclusions from Standards
None
Best EMC
EUT
Click on the first or last page to see other HS 500 (serv.man2) service manuals if exist.