Read Harman Kardon HS 300 (serv.man3) EMC - CB Certificate online
Report No. JSH006030124-001
Page 60 of 81
15.2 Block Diagram of Test Setup
Best EMC
EUT
5.2 .1Test
Ta
lane
en the EUT and any other of the metallic surface except the GRP is
reater than 0.5m.
e plane to insure the distance between the
oupling device and the EUT were 1m or less.
its functional requirement and supplied by
The coupling-decoupling network (Best EMC).
Floor Standing EUT
anding on the ground reference
lane 2.6m by 1.8m, made by aluminium 0.5mm thick.
en the EUT and any other of the metallic surface except the GRP is
reater than 0.5m.
e plane to insure the distance between the
oupling device and the EUT were 1m or less.
its functional requirement and supplied by
The coupling-decoupling network (Best EMC).
Setup and Test Procedure
ble top EUT
the ground reference
2.6m by 1.8m in size, made by aluminium 0.5mm thick.
GRP
1
The EUT was placed on a 0.8m high wooded table, standing on
p
The distance betwe
g
The main lead excess than 1m is gathered into a flat coil with a 0.4m diameter and situated
at a distance of 0.1m above the ground referenc
c
The EUT was arranged and connected to satisfy
p
The distance betwe
g
The main lead excess than 1m is gathered into a flat coil with a 0.4m diameter and situated
at a distance of 0.1m above the ground referenc
c
The EUT was arranged and connected to satisfy
The EUT was placed on a 0.1m high wooden support, st
p
The distance betwe
g
The main lead excess than 1m is gathered into a flat coil with a 0.4m diameter and situated
at a distance of 0.1m above the ground referenc
c
The EUT was arranged and connected to satisfy
p
The distance betwe
g
The main lead excess than 1m is gathered into a flat coil with a 0.4m diameter and situated
at a distance of 0.1m above the ground referenc
c
The EUT was arranged and connected to satisfy
Click on the first or last page to see other HS 300 (serv.man3) service manuals if exist.