Read Harman Kardon HS 2X0 EMC - CB Certificate online
Page 60 of 62 Report No. SH10011244-001
IEC
60825-1
Clause
Requirement + Test
Result - Remark
Verdict
Appendix no. 1
TRF No. IEC60065J
8 CLASSIFICATION
Pass
8.2
Description of laser classes
Class 1
Pass
8.3
Classification responsibilities
Pass
8.4
Classification rules
Pass
8.4a
Radiation of a single wavelength
N/A
8.4b
Radiation of multiple wavelengths
Pass
1). Laser product emission two or more
wavelengths in spectral regions shown as additive
in Table 5
wavelengths in spectral regions shown as additive
in Table 5
:
Visible and IR-A 400nm to
1400nm
1400nm
Pass
2). Laser product emission two or more
wavelengths in spectral regions not shown as
additive in Table 5
wavelengths in spectral regions not shown as
additive in Table 5
:
N/A
8.4c
Radiation from extended sources
Pass
Value of angular subtence
α (mrad)
:
<1.5mrad
―
8.4d
Non-circular and multiple sources
N/A
8.4e
Time basis
Pass
i) 0.25s
N/A
ii) 100s
applied Pass
iii) 30000s
N/A
8.4f
Repetitively pulsed or modulated lasers
Considered continuous output
(CW)
(CW)
N/A
i) exposure from a single pulse not exceeding the
AEL for a single pulse
AEL for a single pulse
N/A
ii) average power for a pulse train
N/A
iii) the average pulse energy from pulses within a
pulse train not exceeding the AEL for a single pulse
multiplied by the correction factor C5
pulse train not exceeding the AEL for a single pulse
multiplied by the correction factor C5
N/A
AEL for continued operation used……...................:
N/A
Total-on-time-pulse (TOTP) method used……......:
N/A
9
MEASUREMENTS FOR CLASSIFICATION
Pass
9.1
Tests
Pass
9.2
Test conditions per Clause 9.2 applied
Pass
Measured laser radiation
:
Within Class 1 limit
(see appended table)
―
9.3
Measurement geometry
Pass
a) aperture diameter (mm).
:
(see appended table)
Pass
b) measurement distance (mm) :
(see appended table)
Pass
Click on the first or last page to see other HS 2X0 service manuals if exist.