Read Harman Kardon HS 2X0 EMC - CB Certificate online
Page 55 of 62 Report No. SH10011244-001
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
APPENDIX National differences United Kingdom
(These differences are taken from IEC 60065(2001) + Amendment 1 (2005).)
15.1.1 Apparatus which is fitted with a flexible cable
or cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets etc.
(Safety) Regulations 1994, unless exempted by
those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
Justification:
SI 1768: 1994
or cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets etc.
(Safety) Regulations 1994, unless exempted by
those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
Justification:
SI 1768: 1994
Pass
APPENDIX National differences for CHINA
(These differences are taken from IEC60065:1998 and adopted to IEC
60065:2001.)
60065:2001.)
4.2.1 first sentence replaced by:
The apparatus is connected to a supply voltage of
0.9 times or 1.1 times of any RATED SUPPLY
VOLTAGE for which the apparatus is designed.
The apparatus is connected to a supply voltage of
0.9 times or 1.1 times of any RATED SUPPLY
VOLTAGE for which the apparatus is designed.
Pass
5.1f） Second paragraph replaced by:
………When single rated voltage is given, it should
be marked 220 V, For a rating range, it should
cover 220 V; when multiple RATED
VOLTAGES are given, one of them must be 220V
and also factory default setting should be 220 V.
………When single rated voltage is given, it should
be marked 220 V, For a rating range, it should
cover 220 V; when multiple RATED
VOLTAGES are given, one of them must be 220V
and also factory default setting should be 220 V.
Pass
5.4 replaced by：
When information with regard to safety is required
according to this standard, this information shall be
given in an instruction for installation or use and
supplied with the apparatus. This information shall
be given in simplify Chinese where the apparatus is
intended to be used.
When information with regard to safety is required
according to this standard, this information shall be
given in an instruction for installation or use and
supplied with the apparatus. This information shall
be given in simplify Chinese where the apparatus is
intended to be used.
Pass
15.1.1 first sentence replaced by:
Plugs and appliance couplers for the connection of
the apparatus to the MAINS and socket-outlets and
interconnection couplers for providing MAINS
power to other apparatus shall comply with the
Chinese National standards, Industrial standards or
relevant IEC standards for plugs and socket-
outlets, appliance couplers or interconnection
couplers.
Plugs and appliance couplers for the connection of
the apparatus to the MAINS and socket-outlets and
interconnection couplers for providing MAINS
power to other apparatus shall comply with the
Chinese National standards, Industrial standards or
relevant IEC standards for plugs and socket-
outlets, appliance couplers or interconnection
couplers.
Pass
Click on the first or last page to see other HS 2X0 service manuals if exist.