HD 990 (serv.man4) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 15

Read Harman Kardon HD 990 (serv.man4) EMC - CB Certificate online

 
                                                                                Page 14 of 51                              Report No. SH08090331-002 
IEC/EN 60065 
Clause 
Requirement – Test 
Result - Remark 
Verdict 
 
TRF No:  IEC/EN 60065H 
 
       TRF originator Intertek ETL SEMKO SH 
 
14.6.5 
Mains switch controlling mains socket outlets 
additional tests to IEC 60058-1 
           
N/A 
 
Socket outlet current marking correct 
           
N/A 
14.7 
Safety interlocks 
No such parts 
N/A 
 
Safety interlocks to 2.8 of IEC 60950 
           
N/A 
14.8 
Voltage setting devices 
No such parts 
N/A 
 
Voltage setting device not likely to be changed 
accidentally 
           
N/A 
14.9 
Motors 
 
N/A 
14.9.1 
Endurance test on motors 
Only low voltage DC servo 
motor in DVD loader 
N/A 
 
Motor start test 
           
N/A 
 
Dielectric strength test 
           
N/A 
14.9.2 
Not adversely affected by oil or grease etc. 
           
N/A 
14.9.3 
Protection against moving parts 
           
N/A 
14.9.4 
Motors with phase-shifting capacitors, three-phase 
motors and series motors meet clause. B.8, B.9 
and B.10 of IEC 60950, Annex B 
           
N/A 
14.10 
Batteries 
 
Pass 
14.10.1 
Batteries mounted with no risk of accumulation of 
flammable gases 
Only non-rechargeable alkali 
batteries in IR remote 
controller. 
Pass 
14.10.2 
No possibility of recharging non-rechargeable 
batteries 
No recharging circuit in 
apparatus 
N/A 
14.10.3 
Recharging currents and times within 
manufacturers limits 
No recharging circuit in 
apparatus 
N/A 
 
Lithium batteries discharge and reverse currents 
within the manufacturers limits 
No lithium battery 
N/A 
14.10.4 
Battery mould stress relief 
No such battery 
N/A 
14.10.5 
Battery drop test 
No such battery 
N/A 
14.11 
Optocouplers 
Separately approved, see 
appended table 
Pass 
 
Optocouplers comply with Cl. 8 
Internal DTI >0.40mm
  
Pass 
 
Internal and external dimensions to 13.1. or 
alternatively 13.6 (jointed insulation) 
int./ext. Cl. &Cr. >4mm / 
6.0mm 
Pass 
14.12 
Surge suppression varistors 
VDE approved 
Pass 
 
Comply with IEC 61051-2 
 
Pass 
Page of 52
Display

Click on the first or last page to see other HD 990 (serv.man4) service manuals if exist.