HD 990 (serv.man4) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 12

Read Harman Kardon HD 990 (serv.man4) EMC - CB Certificate online

 
                                                                                Page 11 of 51                              Report No. SH08090331-002 
IEC/EN 60065 
Clause 
Requirement – Test 
Result - Remark 
Verdict 
 
TRF No:  IEC/EN 60065H 
 
       TRF originator Intertek ETL SEMKO SH 
 
14 
COMPONENTS 
 
14.1 
Resistors 
 
 
a) Resistors between hazardous live parts and 
accessible metal parts 
No such components 
N/A 
 
b) Resistors, other than between hazardous live 
parts and accessible parts 
 
N/A 
 
Resistors separately approved ................................: 
 
N/A 
14.2 
Capacitors and RC units 
 
Pass 
 
Capacitors separately approved 
Yes  
Pass 
14.2.1 
Y capacitors tested to IEC 60384-14, 2
nd
 edition ....:  Y1: CY1, CY2, CY3 
Pass 
14.2.2 
X capacitors tested to IEC 60384-14, 2
nd
 edition ....:  X2: CX1 
Pass 
14.2.3 
Capacitors operating at mains frequency but not 
connected to the mains: tests for X2  ......................: 
No such component 
N/A 
14.2.5 
Capacitors with volume exceeding 1750 mm³, 
where short-circuit current exceeds 0,2 A: 
compliance with IEC60384-1, 4.38 category B or 
better ........................................................................: 
EC1 metal case 
N/A 
 
Capacitors with volume exceeding 1750 mm³, 
mounted closer to a potential ignition source than 
table 5 permits: compliance with IEC 60 384-1, 
4.38 category B or better .........................................: 
EC1 metal case 
N/A 
 
Shielded by a barrier to V-0 or metal  ......................:   
N/A 
14.3 
Inductors and windings 
 
Pass 
 
Comply with IEC 61558-1, IEC 61558-2 
(as relevant) and clause 20.1.4 
 
N/A 
14.3.1 
Transformers and inductors marked with 
manufacturer's name and type  ...............................: 
Switching mode transformer  
TR1: BCK-EC2802 
Pass 
 
Transformers and inductors separately approved ..:  No 
N/A 
14.3.2 
General 
 
Pass 
14.3.3 
Constructional requirements 
 
Pass 
14.3.3.1 
Clearances and creepage distances comply with 
clause 13 
(see appended table) 
Pass 
14.3.3.2 
Transformers meet the constructional 
requirements 
 
Pass 
Page of 52
Display

Click on the first or last page to see other HD 990 (serv.man4) service manuals if exist.