Read Harman Kardon HD 970 (serv.man7) EMC - CB Certificate online
Page 12 of 55
Report No. JSH0503351-001
IEC/EN 60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No: IECEN60065F
TRF originator BEAB
14.3.1
Transformers and inductors marked with
manufacturer's name and type ........................... :
manufacturer's name and type ........................... :
Ganzhou SK Transformer Co.,
Ltd., R30-04-10-30.
Ltd., R30-04-10-30.
Pass
Transformers and inductors separately approved .. : No, tested with appliance.
N/A
14.3.2
General
Class
ΙΙ
transformer.
Pass
14.3.3
Constructional requirements
Pass
14.3.3.1
Clearances and creepage distances comply with
clause 13
clause 13
Double or reinforced insulation
according to clause 13.
according to clause 13.
The minimum distance of main
transformer primary –
secondary is 5.0mm.
transformer primary –
secondary is 5.0mm.
Pass
14.3.3.2
Transformers meet the constructional requirements
Pass
14.3.4.1
Class II transformers have adequate separation
between hazardous live parts and accessible parts
(double or reinforced insulation)
between hazardous live parts and accessible parts
(double or reinforced insulation)
Double or reinforced insulation
according to clause 13.
according to clause 13.
Pass
Coil formers and partition walls > 0,4 mm
Transformer bobbin thickness:
1.4mm.
1.4mm.
Pass
14.3.4.2
Class I transformers, with basic insulation and
protective screening only if all 7 conditions of
14.3.4.2 are met
protective screening only if all 7 conditions of
14.3.4.2 are met
N/A
14.3.4.3
Separating transformers with at least basic
insulation
insulation
N/A
14.3.5.1
Class II transformers have adequate insulation
between hazardous live parts and accessible parts
(double or reinforced insulation)
between hazardous live parts and accessible parts
(double or reinforced insulation)
Double or reinforced insulation
according to clause 13.
according to clause 13.
Pass
Coil formers and partition walls > 0,4 mm
Transformer bobbin thickness:
1.4mm.
1.4mm.
Pass
14.3.5.2
Class I transformers have adequate insulation
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective earth
terminal
between hazardous live parts and accessible
conductive parts or those conductive parts or
protective screens connected to a protective earth
terminal
N/A
Winding wires connected to protective earth have
adequate current-carrying capacity
adequate current-carrying capacity
N/A
14.4
High voltage components
No high voltage component.
N/A
High-voltage components and assemblies:
U > 4 kV (peak) separately approved
U > 4 kV (peak) separately approved
(see appended table)
N/A
Component meets category V-1 of IEC 60707
N/A
Click on the first or last page to see other HD 970 (serv.man7) service manuals if exist.