HD 760 (serv.man4) - Harman Kardon Audio User Guide / Operation Manual. Page 16

Programmed Play Operation

14

To remove tracks from the middle of a
previously programmed sequence, press
the 

@ o

button, and then press

the 

buttons 

8 h

until the desired

track number appears in the display. Press
the 

e

or 

5 

button

to remove the track from the sequence.

The HD760’s programming system enables
you to repeat either a single track, the
entire disc (respectively all programmed
tracks) or a specially programmed passage
that you select.

Repeat All
To repeat all of the tracks on a disc, press
the 

button 

f

or the

button 

$

once until the 

and 

indicators light up. When you see

these indicators, the entire disc or all
programmed tracks will play through to
the end, and then start again from the
beginning. The disc will play continually
until the 

button 

5 k

is pressed.

Repeat One
To repeat the track in play, press the

button 

f

or the 

button 

$

twice. The 

and

indicators will light and the track will
continue to play over and over again
continuously. If the track is changed by
pressing the 

buttons 

8 h

while the

Repeat function is in use, the newly
selected track will be repeated. To stop the
repeat play, press the 

button 

5 k

or press the 

button 

$ f

until

the 

indicator goes out.

Repeat A–B
The HD760 may be programmed to repeat
any section within a track, or a complete
passage or program that includes material
in a series of tracks.

To program the unit for A–B play, first
locate the point on the disc where you wish
to begin the repeated section. At that point,
press the 

button 

g

. The

indicator will light in the

and the 

indicator will blink to show that the
program process has started. Let the disc
continue to play or press the 

—

button 

7 i

or 

fl·

button 

8 h

on the front or remote until you have
reached the end of the section to be
repeated. When the end point is reached,
press the 

button 

g

again.

Note that the 

and 

indicators

will now be illuminated.

Once the 

button 

g

is

pressed for the second time to complete the
programming, the HD760 will
automatically go to the start of the selected
passage and continue to play the section
over and over.

To resume normal play press the 

button 

g

again. The 

and

indicators will go out, and the rest of

the disc will play normally.

The HD760 may be programmed to
automatically go into the play mode when
the unit is turned on.

To use this feature, insert a disc in the
drawer and close the drawer as explained on
page 10. Next, locate the 

switch

¢

on the rear panel. Place the switch in the

ON position and then either turn the unit off
by pressing the front panel 

1

until the 

2

goes dark, or place the unit in the Standby
mode by pressing the 

button

a

on the remote.

When the HD760 is turned on using either
the 

1

or the 

button 

b

the unit will automatically go

into the Play mode and the disc will play
through from the first track to the last.

To return the unit to normal operation,
put the 

switch 

¢

in the OFF

position.