HD 760 (serv.man4) - Harman Kardon Audio User Guide / Operation Manual. Page 15

Programmed Play Operation

13

The HD760’s advanced programming
capability enables you to preset the order
in which tracks play, to repeat one track or
all tracks, and to repeat any portion of a
disc without regard to track numbers.

To program the order in which the tracks
on a disc play, begin by pressing the

button 

! d

. Note that the

indicator will light in the

Ó

. The total

number of tracks and total disc playing
time is also displayed.

You may now begin to enter the tracks in
the order in which you wish to have them
play. When entering track numbers from
the remote control, simply enter the
numbers using the 

c

. Be certain to enter the second digit of

track numbers 10 and above within two
seconds of the first number. Tracks may
also be entered from the front panel or
remote by pressing the 

buttons 

8

h

until the desired track number

appears. Press the 

button 

!

d

to enter the track to memory, and then

proceed to select the next track you wish to
program.

As tracks are entered, two displays will
appear in the display. The first will indicate
the total number of tracks that have been
programmed along with the last track
number entered.

The second display will show the total
cumulative running time of all tracks
entered along with the last track number
programmed. After 6 seconds, only this
display will appear if no other track
number is entered.

As each track is added to the program list,
its number will illuminate at the bottom of
the display.

When you have entered all the tracks that
you wish to program, press the 

button 

4 j

to begin playback of the

programmed sequence. The tracks will
now play back in the order in which they
were programmed.

When the complete set of programmed
tracks has played, the unit will stop. The
program will remain and may be started
again by pressing the 

button 

4 j

.

The program will remain in the player’s
memory as long as the disc is not removed.

NOTE: Once the disc drawer is opened,
the program information is lost, and must
be reentered even if the same disc  is
placed back in the machine.

To check the contents of a program, press
the 

button 

@ o

. Each press of

the button will show the actual track
number, the position the track occupies in
memory (e.g., second track to play) and
the cumulative time for all tracks that
have been programmed up to the one that
is indicated.

To clear one or all tracks from a program,
first press the 

button 

5 k

.

Pressing the 

button 

e

on the

remote, or the 

button 

5

on

the front panel will remove tracks from the
program sequence one at a time, starting
with the last track programmed. For
example, if track #6 was the last selection
in the program order, it will be the first to
be deleted from the program, regardless of
how many tracks are on the disc, and how
many individual tracks have been
programmed.

To clear all tracks at once, press and hold
either the 

button 

5

on the

front panel, or the 

button 

e

on

the remote until the 

indicator

goes out and the display of the disc’s total
running time and number of tracks
appear. You may also clear the total
contents of a track programming sequence
by pressing the 

button 

(

,

or by turning the unit off.