Read Harman Kardon GO AND PLAY (serv.man2) EMC - CB Certificate online
<12007721 001>
Page 100 of 102
National Differences
Clause
Requirement
−
Test
Result – Remark
Verdict
Australian National Differences
is applied to the edge of the board where the heat
sink effect is lowest when the board is positioned
as in normal use. The flame shall not be applied
to an edge, consisting of broken perforations,
unless the edge is less than 3 mm from a
potential ignition source.
The test is not carried out if the –
Printed board does not carry any potential ignition
The test is not carried out if the –
Printed board does not carry any potential ignition
source;
Base material of printed boards, on which the
available apparent power at a connection
exceeds 15 VA operating at a voltage
exceeding 50 V and equal or less than 400 V
(peak) a.c. or d.c. under normal operating
conditions, is of flammability category FV-1 or
better according to AS/NZS 4695.707, or the
printed boards are protected by an enclosure
meeting the flammability category FV-0
according to AS/NZS 4695.707, or made of
metal, having openings only for connecting
wires which fill the opening completely, or
Base material of printed boards, on which the
available apparatus power at a connection
exceeds 15 VA operating at a voltage
exceeding 400 V (peak) a.c. or d.c. under
normal operating conditions, and base
material printed boards supporting spark
gaps which provide protection against
overvoltages, is of flammability category FV-0
according to AS/NSZ 4695.707 or the printed
boards are contained in a metal enclosure,
having openings only for connecting wires
which fill the openings completely.
Compliance is determined using the smallest
thickness of the material.
NOTE - Available apparent power is the
NOTE - Available apparent power is the
maximum apparent power which can be drawn
from the supplying circuit through a resistive load
whose value is chosen to maximise the apparent
power for more than 2 min when the circuit
supplied is disconnected.
Click on the first or last page to see other GO AND PLAY (serv.man2) service manuals if exist.