DSC-T200 (serv.man3) - Sony Digital Camera Service Manual (repair manual)

Model
DSC-T200 (serv.man3)
Pages
7
Size
252.76 KB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera / LEVEL 1
File
dsc-t200-sm3.pdf
Date

View Sony DSC-T200 (serv.man3) Service Manual online

SERVICE MANUAL
LEVEL
 
1
Link
SERVICE NOTE
SPECIFICATIONS
ACCESSORIES
INSTRUCTION MANUAL
Link
Revision History
Revision History
Sony EMCS Co.
DSC-T200_L1
Ver. 1.1  2007.09
DIGITAL STILL CAMERA
2007I0800-1
  © 2007.09
Published by Kohda TEC
9-852-215-42
The components identified by
mark 0  or dotted line with
mark 0 are critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque  0   sont critiques pour la
sécurité.
Ne les remplacer que par une pièce
portant le numéro spécifié.
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Argentine Model
Brazilian model
Japanese Model
Tourist Model
DSC-T200
Photo: Silver
Revised-1
Replace the previously issued
SERVICE MANUAL 9-852-215-41
with this Manual.
— 2 —
DSC-T200_L1
SPECIFICATIONS
Audio output (Monaural)
USB communication
: Video output
Camera
[System]
Image device: 7.18 mm (1/2.5 type) color CCD, 
Primary color filter
Total pixel number of camera: 
Approx. 8 286 000 pixels
Effective pixel number of camera: 
Approx. 8 083 000 pixels
5.8  – 29.0 mm (35 – 175 mm when 
converted to a 35 mm still camera) F3.5 – 4.4
Exposure control: Automatic exposure, Scene 
Selection (10
  modes)
White balance: Automatic, Daylight, Cloudy, 
Fluorescent 1, 2, 3, Incandescent, Flash
File format (DCF compliant):
 
Still images: Exif Ver. 2.21 JPEG compliant, 
DPOF compatible
Movies: MPEG1 compliant (Monaural)
Recording media: Internal Memory (approx. 
31 MB), “Memory Stick Duo”
Flash: Flash range (ISO sensitivity
(Recommended Exposure
approx. 0.8 to 2.9 m (2 feet 7 1/2 inches to
9 feet 6 1/4 inches) (T)
[Input and Output connectors]
Multi connector 
USB communication : Hi-Speed USB (USB 2.0 
compliant)
[LCD screen]
LCD panel: Wide (16:9), 8.8 cm (3.5 type) TFT drive
[Power, general]
Power: Rechargeable battery pack NP-BD1, 3.6 V
NP-FD1 (not supplied), 3.6 V
AC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting): 1.0 W 
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC (–4 to +140  ºF)
protrusions)
Mass (including NP-BD1 battery pack, paint pen
and strap etc.): Approx. 186 g (6.6 oz)
 
Microphone: Monaural
Speaker: Monaural
Exif Print: Compatible
PRINT Image Matching III: Compatible
PictBridge: Compatible
BC-CSD battery charger
Power requirements: AC 100 V
 
to 240 V, 50/60 Hz, 
2.2 W
Output voltage: DC 4.2 V, 0.33 A
Operating temperature: 0 to 40  ºC  (32 to 104  ºF)
Storage temperature: –20 to +60  ºC  (–4 to +140  ºF )
Mass: Approx. 75 g (2.7 oz)
Rechargeable battery pack NP-BD1
Used battery: Lithium-ion battery
Maximum voltage: DC 4.2 V
Nominal voltage: DC 3.6 V
Capacity: 2.4 Wh (680 mAh)
Design and specifications are subject to change 
without notice.
Lens: Carl Zeiss Vario-Tessar 5
× zoom lens f =
Total number of dots: 230 400 (960
×240) dots
Dimensions: 93.5
×59.3×20.4 mm (3 3/4× 
2 3/8
×13/16 inches) (W/H/D, excluding
Dimensions: Approx. 62
×24×91 mm (2 1/2× 
31/32
×3 5/8 inches) (W/H/D)
Index) set to Auto): approx. 0.1 to 3.7 m 
(4 inches to 12 feet 1 3/4 inches) (W)/
— 3 —
DSC-T200_L1
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 
0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270°C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
— 4 —
DSC-T200_L1
Description on Self-diagnosis Display
1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the LCD screen what to
do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
SERVICE NOTE
2. Self-diagnosis Display
When problems occur while the unit is operating, the LCD screen
shows a 4-digit display consisting of an alphabet and numbers, which
blinks at 3.2 Hz. This 5-character display indicates the “repaired
by:”, “block” in which the problem occurred, and “detailed code”
of the problem.
0 0
3 2
C
Repaired by:
Refer to “3. Self-diagnosis Code Table”.
Indicates the appropriate
step to be taken.
E.g.
13 ....Format the “Memory Stick Duo”.
32 ....Turn on power again.
Block
Detailed Code
Blinks at 3.2 Hz
C : Corrected by customer
E : Corrected by service
engineer
LCD screen
3. Self-diagnosis Code Table
C
C
Block
Function
1
3
3
2
Detailed
Code
0
1
0
1
Symptom/State
The internal memory has experienced a
format error.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” type error
The camera cannot read or write data
on the “Memory Stick Duo”.
Trouble with hardware
Correction
Format the internal memory.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a supported “Memory Stick Duo”.
Turn the power off and on again, or taking out and inserting the
“Memory Stick Duo” several times.
Turn the power off and on again.
Self-diagnosis Code
Repaired b
y:

Download Sony DSC-T200 (serv.man3) Service Manual (Repair Manual)

Here you can view online and download Sony DSC-T200 (serv.man3) Service Manual in PDF. DSC-T200 (serv.man3) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DSC-T200 (serv.man3) Digital Camera. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.