Read Harman Kardon DVD 39 (serv.man2) EMC - CB Certificate online
- Page 11 of 42 -
Report
No.
98390
Reinforced or double insulation between
hazardous live parts and accessible parts
hazardous live parts and accessible parts
Double/Reinforced
insulation complies with
requirements specified in
clause 10 and 13.
insulation complies with
requirements specified in
clause 10 and 13.
P
Components bridging reinforced or double
insulation complying with 14.1 a) or 14.3
insulation complying with 14.1 a) or 14.3
The apparatus has
isolating transformers.
isolating transformers.
P
Basic and supplementary insulation each being
bridged by a capacitor complying with 14.1 a)
bridged by a capacitor complying with 14.1 a)
No such capacitors.
N/A
Reinforced or double insulation being bridged
with 2 capacitors in series complying with
14.2.1 a)
with 2 capacitors in series complying with
14.2.1 a)
No such capacitors.
N/A
Reinforced or double insulation being bridged
with a single capacitor complying with 14.2.1 b)
with a single capacitor complying with 14.2.1 b)
Y
1
capacitors, CY91,
CY92, CY93 and CY94;
inside the enclosure.
inside the enclosure.
P
Basic insulation bridged by components
complying with 14.3.4.3
complying with 14.3.4.3
No such components.
N/A
8.7
This clause is void
—
8.8
Basic or supplementary insulation > 0,4 mm (mm)
................................................................................. :
................................................................................. :
N/A
Reinforced
insulation > 0,4 mm (mm) ............... :
a.
Sheet of insulation in
top side of the SMPS
between primary and
metal chassis (top cover).
Tested acc. to cl. 10.3 - OK.
between primary and
metal chassis (top cover).
Tested acc. to cl. 10.3 - OK.
b. Transformer bobbin
thickness: > 0,4mm
Tested acc. to cl. 10.3.-OK.
See list of critical comp.
Tested acc. to cl. 10.3.-OK.
See list of critical comp.
c. Optocouplers inner
insulation, ref. 14.11.
P
Thin sheet insulation (excluding non-separable
thin sheet insulation. See 8.22)
thin sheet insulation. See 8.22)
P
Basic or supplementary insulation, at least two
layers, each meeting 10.3
layers, each meeting 10.3
N/A
Basic or supplementary insulation, three layers
any two of which meet 10.3
any two of which meet 10.3
N/A
Click on the first or last page to see other DVD 39 (serv.man2) service manuals if exist.