AVR 507 (serv.man2) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 10

Read Harman Kardon AVR 507 (serv.man2) EMC - CB Certificate online

 - 
IEC 60065, 6th edition : 1998
 - 
- Page 6 of 38 - 
 
 
   
 Order 
No. 
11152
 
 
 
 
5.2 
Earth terminal   
Class II apparatus 
 
Hazardous live terminals   
No live parts accessible 
 
Supply output terminals (other than 
mains)  
The power is marked close to the socket outlet; 
”AC OUTLETS (~230V/50Hz),   
UNSWITCHED (100W MAX),   
SWITCHED (50W MAX)” 
5.3 
Use of triangle with exclamation 
mark         
         
(Symbol ISO 7000-0434)   
Correct symbol applied: Imprinted on rear side in 
connection with CAUTION of opening. Further; no 
incorrect use of this symbol is found. 
5.4 
Instructions for use   
 
5.4.1 
Mains powered equipment not 
exposed to dripping or splashing   
Adequate instructions supplied. 
   
 
Hazardous live terminals, 
instructions for wiring   
No live terminal. 
 
 
Instructions for replacing lithium 
battery  
No lithium battery 
 
 
Explanation of marking of the 
manually operated mechanical 
switch (MOMS)   
No explanation required (indication in the form of 
illumination) 
 
5.4.2 
Instructions for permanently 
connected equipment   
If not completely switched OFF from 
the mains, info required 
The apparatus is not for permanent connection 
 
6 HAZARDOUS 
RADIATION 
 
 
No radiation 
6.1 
High voltage (kV).   
 
 
Focus voltage (kV)   
 
 
Amount of radiation     
 
6.2 
Non-ionizing radiation (laser 
radiation)  
 
6.2.1 
Opening of any cover by hand   
 
 
Mechanical interlocking device   
 
 
Accessible emission normal 
operation / classification   
 
 Labelling 
 
 
6.2.2 
Accessible emission fault condition 
outside / inside 
 
 
Warning label requirement   
 
 
Page of 50
Display

Click on the first or last page to see other AVR 507 (serv.man2) service manuals if exist.