Read Harman Kardon AVR 370 EMC - CB Certificate online
Page 1 of 1
Report No.: 215445
ATTACHMENT 6
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Chinese Differences
Test results according to Online CB BULLETIN (Last modification date of 2010-06-23)
Differences according .................... : IEC 60065, 6th edition (1998)
Corresponding National Standard GB 8898-2001
Clause
Requirements – Test
Result – Remark
Verdict
4.2.1
The first sentence replaced by:
The apparatus is connected to a supply
voltage of 0,9 times or 1,1 times of any
RATED SUPPLY VOLTAGE for which the
apparatus is designed.
The apparatus is connected to a supply
voltage of 0,9 times or 1,1 times of any
RATED SUPPLY VOLTAGE for which the
apparatus is designed.
Tested at 0,9 times or 1,1 times
of the RATED SUPPLY VOLTAGE.
of the RATED SUPPLY VOLTAGE.
P
5.1 f）
At the end of the last paragraph, added：
…….For single rated voltage, “ 220 V” shall
be marked only. For a rating range, 220 V
shall be covered. For multiple rated
voltages, one of them shall be 220 V and
which default setting in a
factory shall be 220 V as well.
…….For single rated voltage, “ 220 V” shall
be marked only. For a rating range, 220 V
shall be covered. For multiple rated
voltages, one of them shall be 220 V and
which default setting in a
factory shall be 220 V as well.
Marked 220-240 V, covered 220 V.
P
5.1g)
Following the first sentence, added:
… ….Rated MAINS frequency shall be 50Hz
or a range of frequencies covered 50Hz.
… ….Rated MAINS frequency shall be 50Hz
or a range of frequencies covered 50Hz.
Rated MAINS frequency covered
50Hz
50Hz
P
5.4
The first paragraph replaced by：
When information with regard to safety is
required according to this standard, this
information shall be given in an
instruction for installation or use and
supplied with the apparatus. This
information shall be given in normative
Chinese.
When information with regard to safety is
required according to this standard, this
information shall be given in an
instruction for installation or use and
supplied with the apparatus. This
information shall be given in normative
Chinese.
Adequate instruction supplied by
Chinese manual with the apparatus.
Chinese manual with the apparatus.
P
13.1.1
After the first paragraph, added:
NOTE—For apparatus intended to be used
over 2000m above sea level, the reduced
values of basic and reinforced insulation are
under consideration.
NOTE—For apparatus intended to be used
over 2000m above sea level, the reduced
values of basic and reinforced insulation are
under consideration.
Not intended for over 2000m above
sea level use.
See copy of marking plate.
sea level use.
See copy of marking plate.
N/A
15.1.1
The first sentence replaced by:
Plugs and appliance couplers for the
connection of the apparatus to the
MAINS and socket-outlets and
interconnection couplers for providing
MAINS power to other apparatus shall
comply with the Chinese National and
Industrial standards or relevant IEC
standards for plugs and socket-outlets,
appliance couplers or interconnection
couplers.
Plugs and appliance couplers for the
connection of the apparatus to the
MAINS and socket-outlets and
interconnection couplers for providing
MAINS power to other apparatus shall
comply with the Chinese National and
Industrial standards or relevant IEC
standards for plugs and socket-outlets,
appliance couplers or interconnection
couplers.
Mains plug with cord complying
Chinese National and Industrial
standards provide.
Chinese National and Industrial
standards provide.
P
