AVR 161 (serv.man4) - Harman Kardon Audio EMC - CB Certificate (repair manual). Page 100

Page 5 of 5 

Report No.: 232105 

 

ATTACHMENT 5 

Clause 

Requirement + Test 

Result - Remark 

Verdict 

  

TRF No. IEC60065K 
 

35 

Water heater 
incorporated with 
residual current 
device(RCD) 

Testing to sub-clauses 9.9.2.1, 
9.9.2.2, 9.9.2.3 and 9.16 of SS 97: 
Part 1: 2000 are required. 

Applicable to multiway adaptor 

36 Multiway 

adaptor 

with 3-pin socket-
outlets or 
combination of 3-
pin and 2-pin 
socket-outlets 

a) The socket contacts of the 
adaptor shall only accept 13A 3-pin 
mains plug complying with SS 145 
and/or 2.5A 2-pin mains plug 
complying with EN 50075. 
b) The shutters screening the 
current-carrying socket contacts 
shall not be opened by the 
insertion of any corresponding 
SINGLE pin of the plug into any 
current-carrying socket aperture. 
c) A barrier or other acceptable 
means shall be provided on the 
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to 
PREVENT entry of any types of 2-
pin mains plugs except those 
complying with EN 50075. (note: 
shutters cannot be regarded as 
barriers) 
d) Adaptor incorporates with switch 
would require additional test to 
sub-clauses 13.11, 17.1.3 and 
18.1.3 of SS 145: Part 2: 1997. 

No multiway adaptor 

Applicable to plasma/LCD display monitor 

37 Plasma/LCD 

display monitor 
with TV tuner 

Plasma/LCD display monitor tested 
to IEC 60950 would require 
additional test to clauses 9 (related 
to antenna only), 10.1, 10.2, 10.3 
and 12.5 of IEC 60065. 

No Plasma/LCD display 
monitor