Read Harman Kardon AVR 11 (serv.man5) User Guide / Operation Manual online
Front Panel Controls
3
ENGLISH
^ RDS Selector: Press this button
to activate the RDS-search-system.
Note that RDS will appear in the
display window. Pressing the
TUNING/PTY
to activate the RDS-search-system.
Note that RDS will appear in the
display window. Pressing the
TUNING/PTY
& buttons will
advance the tuner to the next available
station that is transmitting RDS data.
Press the RDS-button again to
resume tuning of all stations. See
page 11 for complete information on
the RDS system.
station that is transmitting RDS data.
Press the RDS-button again to
resume tuning of all stations. See
page 11 for complete information on
the RDS system.
& TUNING/PTY
⁄ ¤
: When the
tuner is selected, pressing
¤
tunes to
stations with lower frequency,
pressing
pressing
⁄
tunes to higher frequen-
cies. This button is also used to scroll
up or down through the list of PTY
choices when the RDS system is in
use.
up or down through the list of PTY
choices when the RDS system is in
use.
* RT Selector: When the RDS sys-
tem is engaged by pressing RDS
tem is engaged by pressing RDS
^,
pressing this button will display a
scrolling text message with additional
datas about the station or programme
being transmitted. If there is no RT
message the display will indicate
NO TEXT.
scrolling text message with additional
datas about the station or programme
being transmitted. If there is no RT
message the display will indicate
NO TEXT.
( RDS DISPLAY Button: Pressing
this button when the RDS system is
engaged will change messages in the
display window. The normal
display is the Station Name. Press the
button once to display the Programme
Type (PTY) and again to show the
correct clock time (CT). Press again to
show the station’s frequency and
again to return to the Station Name. If
no data is available for the station
being tuned, a message to that effect
will appear in the display.
this button when the RDS system is
engaged will change messages in the
display window. The normal
display is the Station Name. Press the
button once to display the Programme
Type (PTY) and again to show the
correct clock time (CT). Press again to
show the station’s frequency and
again to return to the Station Name. If
no data is available for the station
being tuned, a message to that effect
will appear in the display.
Ó POWER/MUTE: This indicator will
glow in a green color whenever the
unit is turned on and its position gives
you a relative indication of the volume
level. When the volume is muted by
pressing the MUTE
glow in a green color whenever the
unit is turned on and its position gives
you a relative indication of the volume
level. When the volume is muted by
pressing the MUTE
q button on the
remote, the indicator will flash as a
reminder that the unit is on, but the
speaker output has been temporarily
silenced.
reminder that the unit is on, but the
speaker output has been temporarily
silenced.
Ô VOLUME Control: Turn the knob
clockwise to increase the volume and
counterclockwise to decrease it. The
volume of the front, center and rear
channels is changed at the same time.
Note that the volume control is
motorized, and will rotate
automatically when the volume is
changed with the remote control.
clockwise to increase the volume and
counterclockwise to decrease it. The
volume of the front, center and rear
channels is changed at the same time.
Note that the volume control is
motorized, and will rotate
automatically when the volume is
changed with the remote control.
AVR11 engelsk manual 11/01/98 10:46 Side 3
Click on the first or last page to see other AVR 11 (serv.man5) service manuals if exist.