Read Harman Kardon AVR 10 (serv.man7) User Guide / Operation Manual online
14
AVR10 System Remote Control
1. INFRARED
TRANSMITTER WINDOW
TRANSMITTER WINDOW
The infrared beam is emitted forward
from this window when you press any
button on the commander. For the
remote controls to function properly,
always face this window toward the
remote sensor window on the
receiver and do not obstruct this
window with any material.
from this window when you press any
button on the commander. For the
remote controls to function properly,
always face this window toward the
remote sensor window on the
receiver and do not obstruct this
window with any material.
2. STANDBY BUTTON
Press this button to turn the power on
and off.
NOTE: For the Standby Button to
work, the power switch on the AVR
10 must be set to ON.
Automatic power on: When you press
the input function buttons (CD,
TUNER, TAPE, TV/AUX, VCR1,
VCR2) in STANDBY mode, the power
is automatically turned on and the
function is selected.
and off.
NOTE: For the Standby Button to
work, the power switch on the AVR
10 must be set to ON.
Automatic power on: When you press
the input function buttons (CD,
TUNER, TAPE, TV/AUX, VCR1,
VCR2) in STANDBY mode, the power
is automatically turned on and the
function is selected.
3. TUNING UP/DOWN
Press these buttons to tune the
receiver up or down.
receiver up or down.
4. PRESET SCAN BUTTON
Button for scanning preset station
frequencies (see page 13).
frequencies (see page 13).
5. NUMERIC BUTTONS
These buttons can be used for preset
tuning in TUNER mode.
Preset tuning: Select one of 30 preset
locations by pressing the numeric
buttons directly, thereby the input of
the receiver automatically is changed
to TUNER.
tuning in TUNER mode.
Preset tuning: Select one of 30 preset
locations by pressing the numeric
buttons directly, thereby the input of
the receiver automatically is changed
to TUNER.
6. CD FUNCTION BUTTONS
For a CD PLAYER: DISC (DISC
SELECTOR is available for the
Harman Kardon FL8400, FL8450CD
changer), PLAY, PAUSE, STOP,
BACKWARD SEARCH, FORWARD
SEARCH, A-B and INTRO buttons are
available.
When selecting a disc, press the
DISC button.
SELECTOR is available for the
Harman Kardon FL8400, FL8450CD
changer), PLAY, PAUSE, STOP,
BACKWARD SEARCH, FORWARD
SEARCH, A-B and INTRO buttons are
available.
When selecting a disc, press the
DISC button.
7. CASSETTE DECK
FUNCTION BUTTONS
FUNCTION BUTTONS
For a cassette deck:
PAUSE/RECORD, STOP, REVERSE
PLAY, FORWARD PLAY, REWIND,
FAST FORWARD buttons are
available.
PAUSE/RECORD, STOP, REVERSE
PLAY, FORWARD PLAY, REWIND,
FAST FORWARD buttons are
available.
8. DELAY TIME BUTTON
This button operates only in Dolby
Pro Logic mode. In this mode the
output signal from the surround
speakers is delayed slightly from that
of the front speakers.
Select appropriate delay time to
Pro Logic mode. In this mode the
output signal from the surround
speakers is delayed slightly from that
of the front speakers.
Select appropriate delay time to
achieve the best surround sound
effect. For Dolby Surround sound, we
recommend a 20ms delay. The delay
time is changed as below, when the
button is pressed in succession.
effect. For Dolby Surround sound, we
recommend a 20ms delay. The delay
time is changed as below, when the
button is pressed in succession.
DOLBY PRO LOGIC MODE
9. INPUT
FUNCTION SELECTOR
FUNCTION SELECTOR
Press the button to select the desired
input function. The available buttons
are CD, TUNER, TAPE MON, TV/AUX,
VCR1, and VCR2.
input function. The available buttons
are CD, TUNER, TAPE MON, TV/AUX,
VCR1, and VCR2.
10. CENTER LEVEL
UP/DOWN BUTTONS
UP/DOWN BUTTONS
Use these buttons to adjust the
sound level of the center speaker to
that of the front speakers. These
buttons work only in Dolby Pro Logic
and Dolby 3 Stereo mode. These
buttons do not work in PHANTOM
mode.
sound level of the center speaker to
that of the front speakers. These
buttons work only in Dolby Pro Logic
and Dolby 3 Stereo mode. These
buttons do not work in PHANTOM
mode.
11. CENTER MODE BUTTON
Selects the center mode (see page 11).
12. TEST TONE BUTTON
Generates test sounds in all channels
(Left, Center, Right and Surround) in
succession.
(Left, Center, Right and Surround) in
succession.
13. REAR LEVEL
UP/DOWN BUTTONS
UP/DOWN BUTTONS
These buttons operate only in Dolby
PRO LOGIC mode. Use these buttons
to adjust the sound level of the
surround speakers. Set the MASTER
VOLUME control at the desired level
and press the REAR LEVEL up or
down button until you get the
optimum surround effect at your
listening position.
PRO LOGIC mode. Use these buttons
to adjust the sound level of the
surround speakers. Set the MASTER
VOLUME control at the desired level
and press the REAR LEVEL up or
down button until you get the
optimum surround effect at your
listening position.
14. MASTER VOLUME
BUTTONS
BUTTONS
Adjust the overall (Front, Center, and
Rear) volume level.
Rear) volume level.
15. DISPLAY BUTTON
Press once and the display dims,
press again and it turns off. Press a
third time and it goes on.
press again and it turns off. Press a
third time and it goes on.
16. SLEEP BUTTON
Set the receiver to automatically turn
off after 10, 20, 30, 60, or 90 minutes.
Each time the button is pressed, the
setting is advanced as below.
off after 10, 20, 30, 60, or 90 minutes.
Each time the button is pressed, the
setting is advanced as below.
The display will dim when the sleep
function has been set.
function has been set.
ENGLISH
15 ms
20 ms
25 ms
30 ms
15 ms
20 ms
25 ms
30 ms
AVR10 engelsk 11/01/98 10:10 Side 14
Click on the first or last page to see other AVR 10 (serv.man7) service manuals if exist.